The paper presents an analytical review of the current state of fused filament fabrication (FFF/FDM) technologies with emphasis on multi-colour and multi-material printing architectures. The key kinematic schemes of FDM printers are considered along with the physical and mathematical models of the material extrusion process, including volumetric flow rate, melt hydrodynamics, interlayer adhesion and thermal shrinkage. The properties and processing parameters of the most common thermoplastic materials (PLA, ABS, PETG, PA, PC, PEEK, PVA, HIPS, TPU and fibre-reinforced composites) are systematised. The main contribution of the review is a structured comparison of four multi-material FDM architectures: dual-hotend systems, independent dual extruder (IDEX) systems, automatic filament-switching units (MMU/AMS), and the tool-changing (Toolchanger) architecture. It is shown, on the basis of published experimental data and model estimates, that the Toolchanger approach reduces material waste by approximately 170 times compared with MMU/AMS solutions and shortens print time for a model requiring 200 material changes by roughly 2.8 hours. The operating principle of the Maxwell kinematic coupling ("three balls – three V-grooves") that ensures sub-micron repositioning repeatability (δ_xy = 1–5 µm) is described. Material compatibility criteria, engineering application fields and a total cost of ownership model for justifying the adoption of Toolchanger systems in serial multi-material production are discussed. Directions for further research are outlined, including optimisation of kinematic coupling geometry, automatic Z-offset calibration using machine learning, and integration of hybrid tool sets within a single manufacturing platform.