Reduced graphene oxide (rGO) is widely seen as the most promising route for the low-cost mass production of graphene for many applications ranging from ultrathin electrodes to structural nanocomposites. The Hummers and Marcano methods are the two most successful approaches for producing high-performance rGO, but have been criticized for producing toxic emissions. We have applied life cycle assessment methodology to evaluate the environmental impacts of both production routes for GO and rGO in the context of applications requiring bulk materials or thin coatings. We find no current obstacle to the industrial scale production of graphene arising from its environmental impact. The cumulative energy demand is found to have a cap value between 20.7 and 68.5 GJ/Kg, a relatively high value; impact in other categories (such as human toxicity or resource depletion) is lower, and materials inventory does not include critical/strategic materials other than graphite itself. Our study proposes 1 kg of graphene as functional unit, and an application-specific functional unit normalized by conductivity which show that Hummers production method is far more suitable for bulk applications of graphene, with lower embedded energy per kg of graphene production, while Marcano’s production method is better suited for thin film electronic applications.
Carbon nanofoam (CNF) is a highly porous, amorphous carbon nanomaterial that can be produced through the interaction of a high-fluence laser and a carbon-based target material. The morphology and electrical properties of CNF make it an ideal candidate for supercapacitor applications. In this paper, we prepare and characterize CNF supercapacitor electrodes through two different processes, namely, a direct process and a water-transfer process. We elucidate the influence of the production process on the microstructural properties of the CNF, as well as the final electrochemical performance. We show that a change in morphology due to capillary forces doubles the specific capacitance of the wet-transferred CNF electrodes.