1 February 2017 in Optical Engineering
The infrastructure essentialities for accurate time and stable frequency distribution are presented. Our solution is based on sharing fibers for a research and educational network carrying live data traffic with time and frequency transfer in parallel. Accurate time and stable frequency transmission uses mainly dark channels amplified by dedicated bidirectional amplifiers with the same propagation path for both directions of transmission. This paper targets challenges related to bidirectional transmission, particularly, directional nonreciprocities.
4 May 2017 in Fiber and Integrated Optics
Currently, individual optical fibers are mostly used for each non-data application, which is very inefficient and uneconomical. Sharing a single fiber for multiple applications is a promising solution. However, in the case of a non-data application, the situation is much more complicated compared to data because of special application´s requirements. In laboratory setup, we performed a measurement with a standard G.652D optical fiber for analyzing possible interaction of stable frequency/accurate time transmission, 1.25/10Gbps data transmission (typical bitrates for access point-to-point networks), and high-power sensor signal for different channel spacing and different pulse duration of sensor signal.
15 July 2020 in IEEE Access
The optical fibres widely used in telecommunication can be simultaneously used for (distributed) sensing or fibre network self-monitoring. In our work, we monitor changes in the fibre environment via monitoring changes in the state of light polarization without the utilization of methods based on back-scattered light. These changes can generate a vast amount of data, but it is generally not straightforward to extract useful information from them, e.g., future fibre break predictions or earthquake monitoring. We suggest using machine learning to solve this problem. However, since the measured data events are not labelled (i.e., we do not know in advance what fingerprint in the measured data corresponds to a future fibre break), unsupervised machine learning methods must be used. Here, we report a proof-of-concept approach in which we use a simple polarimetric technique and installed optical fibre, which we disturb with controlled vibrations, knocking on the fibre, and rack door closing near the fibre. Using a machine learning K-means algorithm, we distinguish between data generated with these controlled disturbances and data generated by noise due to common traffic. These results are the first step along the way to automated data labelling, which can be used for the classification of events.
1 April 2017 in Optics Communications