1 March 2017 in Electronics Letters
A mutual coupling reduction antenna design for WLAN MIMO application is proposed. The proposed antenna array consists of two rectangular patch antennas, six parallel metal strips, a single substrate layer, and common ground plane. About −42 dB mutual coupling is achieved at the 5.8 GHz resonant frequency. Both simulation and measurement results confirm improvements in mutual coupling at about 30 dB when compared with those without metal strips. The radiation patterns are almost unaffected by adding these metal strips in the proposed antenna.
6 November 2011 in AEU - International Journal of Electronics and Communications
5 March 2010 in Microwave and Optical Technology Letters
20 January 2012 in Microwave and Optical Technology Letters
1 January 2020 in Progress In Electromagnetics Research Letters
A triple-band patch antenna operating at 0.9, 1.8 and 2.4 GHz is presented. The triple-band characteristic is realized by using a radiating patch and two meander lines achieved by embedding slots in its radiating patch. According to the current distribution of the radiating patch, the locations of two meander lines are chosen. The proposed antenna has the advantages of the easy control of each resonant frequency and relatively simple antenna structure. The measured-10 dB impedance bandwidths are 30, 40, and 30 MHz at 0.9, 1.8, and 2.4 GHz, respectively. The simulated and measured radiation patterns and gains are also presented and discussed.
26 September 2015 in Microwave and Optical Technology Letters