Youzheng Wang

Youzheng Wang

Auto-generated profile, based on publicly available information

Youzheng Wang

Harbin Institute of Technology

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 May 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Liu HongchenLiu Hongchen
Liu Hongchen
YWYouzheng Wang
Youzheng Wang
HYHuiying Yu
Huiying Yu
FWfengjiang wu
fengjiang wu
Patrick WheelerPatrick Wheeler
Patrick Wheeler
Aiming at the problems of large switching loss and large output power fluctuation in the existing omnidirectional wireless power transfer (OWPT) system, a novel OWPT system with zero-switching-loss inverter and cylindrical transmitter coil is proposed. By introducing an auxiliary resonant network with simple structure and low-loss on each phase arm of the three-phase inverter, zero-voltage switching turn- on and zero-current switching turn- off within the full power range can be acquired. The switching loss in the main circuit of inverter is reliably eliminated. The transmitter coil is a cylindrical coil composed of the three curved rectangular coils, whose excitation current amplitude is equal and the phase difference is 120°. It can arise a spatial rotating magnetic field around the transmitter coil and provide an omnidirectional energy transmission channel. The operating principle of soft-switching is analyzed in detail, and the design rules of soft-switching in full power range and the parameter design method of coupler to reduce the fluctuation of output power are given. Ultimately, an experimental prototype is used to verify the feasibility of the proposed OWPT system. The experimental results indicate that the system output power is retained at 93.4–104.7 W and transfer efficiency is retained at 71.2%–78.1% under arbitrary angular misalignment of receiver.

12 June 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YWYouzheng Wang
Youzheng Wang
Liu HongchenLiu Hongchen
Liu Hongchen
Patrick WheelerPatrick Wheeler
Patrick Wheeler
FWfengjiang wu
fengjiang wu
To significantly reduce switching loss of the high frequency inverter in battery wireless charger (BWC), improve the soft-switching stability and system reliability, a novel soft-switching BWC with low loss auxiliary network and reconfigurable rectifier is presented. The presented soft-switching BWC can implement the smooth switching between constant current mode and constant voltage mode without frequency switching and relays, which is beneficial to enhancing the system stability. With the help of a novel low energy consumption auxiliary circuit, the power switch tubes in the H-bridge inverter can implement zero-voltage soft switch- on and zero-current soft switch- off in the full range, completely eliminating switching loss of the inverter. The proposed scheme can enhance the system efficiency while refraining from the soft-switching range limitation and soft-switching failure caused by the system parameter perturbation. Finally, a 1-kW soft-switching BWC principle prototype is developed to validate the effectiveness and correctness of the proposed scheme.

22 December 2022 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
Verified
Journal Article
Closed access
YWYouzheng Wang
Youzheng Wang
Liu HongchenLiu Hongchen
Liu Hongchen
FWfengjiang wu
fengjiang wu
Patrick WheelerPatrick Wheeler
Patrick Wheeler
QZQikun Zhou
Qikun Zhou
SZShiyu Zhao
Shiyu Zhao
With the purpose of improving the reliability of inductive power transfer (IPT) system, a three-coil hybrid IPT topology with improved tolerance to coupling variation and load-independent output is presented, which can ensure constant output of the system under the condition of load and coupling coefficient changing simultaneously. The topology adds two mode switches and an auxiliary compensation capacitor to the receiver side of the system to switch the series–series (SS) topology with constant current output feature and the series-inductor–capacitor–capacitor (S- LCC ) topology with constant voltage output feature. Moreover, the transmitting coil adopts two coils in reverse series to improve the misalignment tolerance. The topology retains the merits of SS and S- LCC topology, such as soft-switching operation, decoupling between output and load, zero phase angle input, and the output features, that do not depend on the coupler parameters. Meanwhile, there is no need to build wireless communication between the receiver and the transmitter, which can simplify the control method. This article systematically describes the operating principle of the presented hybrid IPT charger, and the design ideas of compensation network parameters and coupler are also given. A 460-W experimental prototype is built to test the performance of the presented hybrid IPT charger.

27 April 2023 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
Verified
Journal Article
Closed access
YWYouzheng Wang
Youzheng Wang
Liu HongchenLiu Hongchen
Liu Hongchen
HYHuiying Yu
Huiying Yu
Patrick WheelerPatrick Wheeler
Patrick Wheeler
QZQikun Zhou
Qikun Zhou
SZShiyu Zhao
Shiyu Zhao
The battery is mostly adopted as the load in current wireless charge applications. The wireless charger should provide configurable constant current (CC) and constant voltage (CV) outputs for the batteries. The implementation of configurable CC and CV outputs mostly rely on the additional dc–dc converter, hybrid topology, or high-order networks, resulting in complex control and poor reliability. Moreover, the battery wireless charger should also have anti-misalignment ability. To attack the above problems, a hybrid battery wireless charger is proposed for self-adapting battery charging curve and antimisalignment. A double-solenoid quadrature coupler (DSQC) consisting of square quadrature coil and double-solenoid coil is designed, which combines the coupler with clamp circuit to switch between the two coils automatically, ensuring that the output voltage has small fluctuation within a large lateral misalignment range and inherent CC-to-CV output. The control means is relatively simple, the output threshold is not limited by the parameters of DSQC. Eventually, an experimental prototype with 100 V/4.1A output is built to verify the correctness of the proposed scheme.

29 August 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YWYouzheng Wang
Youzheng Wang
Liu HongchenLiu Hongchen
Liu Hongchen
HYHuiying Yu
Huiying Yu
Patrick WheelerPatrick Wheeler
Patrick Wheeler
To enhance the efficiency and soft-switching stability of the battery wireless charger within the full load range, a soft-switching battery wireless charger (SS-BWC) is presented. The presented SS-BWC can achieve smooth switching from constant current mode to constant voltage mode under the condition of uncomplicated control. The high-frequency inverter (HFI) can operate with zero switching loss in the whole charging process by adopting a novel auxiliary resonant network, which can effectively reduce the switching loss in the HFI and refrain from soft-switching loss due to the compensation element parameter perturbation. Besides, the HFI adopts a new modulation method, and only one power switch tube is in the high-frequency switching state in a switching cycle, which is also conducive to enhancing efficiency. The operating principle of the presented SS-BWC is elaborated in detail, and the realization conditions for soft-switching are also designed. Finally, an experimental device is built to verify the feasibility and superiority of the proposal.

24 May 2023 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
YWYouzheng Wang
Youzheng Wang
Liu HongchenLiu Hongchen
Liu Hongchen
HYHuiying Yu
Huiying Yu
FWfengjiang wu
fengjiang wu
Patrick WheelerPatrick Wheeler
Patrick Wheeler
SZShiyu Zhao
Shiyu Zhao
To solve the problems of output voltage and system efficiency sharply decreasing in the case of misalignment for the electric vehicle inductive power transfer (IPT) charging system, a universal hybrid coupler with high misalignment tolerance is proposed. The hybrid coupler consists of a four-coil bipolar (BP) coupler, the T-type network and a compensation capacitor, which effectively achieves high anti-misalignment for any compensation networks. The introduction of the T-type network makes the two overlapping coils in the same side of the BP coupler transmitter decouple effectively and simplifies the design. Although the two overlapping coils in the receiver side are still coupled with each other, the parameter design only needs to consider the cross-coupling to be small enough, which significantly reduces the design difficulty of the coupler without iteration and repetition. Finally, a 2-kW misalignment-tolerance hybrid IPT system is constructed based on the proposed hybrid IPT coupler. A configurable series-series (SS) and series/inductor-capacitor- capacitor(S/LCC) compensation topologies are used to implement constant current (CC) and constant voltage (CV) load-independent outputs in the face of conditions where the coupling coefficient and load change simultaneously. The experimental results validate the correctness of the theoretical analysis.