Klaus Solbach

Klaus Solbach

Auto-generated profile, based on publicly available information

Klaus Solbach

Institute of Digital Signal Processing, University of Duisburg-Essen, Duisburg, Germany

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2020 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Open access
Alejandro Jiménez SáezAlejandro Jiménez Sáez
Alejandro Jiménez Sáez
MSMartin Schusler
Martin Schusler
MEMohammed El-Absi
Mohammed El-Absi
AAAli Alhaj abbas
Ali Alhaj abbas
KSKlaus Solbach
Klaus Solbach
RJRolf Jakoby
Rolf Jakoby
This paper presents the integration of frequency selective surfaces (FSSs) with retroreflectors for the realization of chipless wireless indoor localization tag landmarks. As an example, the high radar cross-section (RCS) of a trihedral corner reflector is signed with an FSS-based stop-band filter, so that the backscattered power from several corner reflectors can be distinguished by a mobile reader according to the frequency response of the FSS. Measurement results with a ${3\times3\times3 cm^{3}}$ trihedral corner reflector and a stop-band FSS in a Rogers RT/Duroid® 5880 high-frequency laminate at 90 GHz shows an RCS above -25 dBsqm for 90 degrees coverage in the TM plane. Due to the high RCS, measurements at distances up to 4 meters with a standard 25 dBi gain horn antenna and a vector network analyzer as a reader are shown. These preliminary results show the potential of the concept for applications such as indoor localization with sub-mm accuracy, where high-bandwidths, but only a low number of bits, are needed for the identification of the tag landmarks.

20 March 2019 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AAAli Alhaj abbas
Ali Alhaj abbas
MEMohammed El-Absi
Mohammed El-Absi
AAAshraf Abualhijaa
Ashraf Abualhijaa
KSKlaus Solbach
Klaus Solbach
Thomas KaiserThomas Kaiser
Thomas Kaiser

27 April 2020 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
MEMohammed El-Absi
Mohammed El-Absi
AAAli Alhaj abbas
Ali Alhaj abbas
AAAshraf Abuelhaija
Ashraf Abuelhaija
KSKlaus Solbach
Klaus Solbach
Thomas KaiserThomas Kaiser
Thomas Kaiser
This paper presents a realistic feasibility of radio frequency identification (RFID) based self-localization of objects in real environments using simple infrastructure composed of chipless tags. These tags are designed as arrays of dielectric resonators (DR) in order to overcome the range limitations of the traditional chipless tags, where the DR array structure of the tags boosts the radar cross section (RCS) and, consequentially, extends the range coverage. Furthermore, an efficient algorithm for tag detection is proposed considering the environmental and hardware impairments that alter the backscattered signal from the tag. In this system, the reader interrogates the reference nodes, i.e. chipless tags, by a frequency-sweep RF signal, and the backscattered signals from the tags are captured and analyzed at the reader for detection, ranging and location estimation. A testbed is implemented with fabricated chipless RFID tags in order to evaluate the validity and accuracy of the proposed self-localization system. Experimental measurements based simulations are conducted in several scenarios in order to evaluate the proposed system. Moreover, an object (the reader) is moved to several locations in an interrogation area of 2.5*1.2 m, and, afterwards, its location is estimated. The averaged measured location error achieved based on the proposed system is approximately 5 cm with a variation of 0.9 cm as a minimum observed error and 7 cm as a maximum error.

15 July 2020 in Sensors
Verified
Journal Article
Open access
PDF file
MEMohammed El-Absi
Mohammed El-Absi
FZFeng Zheng
Feng Zheng
AAAshraf Abuelhaija
Ashraf Abuelhaija
AAAli Alhaj abbas
Ali Alhaj abbas
KSKlaus Solbach
Klaus Solbach
Thomas KaiserThomas Kaiser
Thomas Kaiser
Indoor localization based on unsynchronized, low-complexity, passive radio frequency identification (RFID) using the received signal strength indicator (RSSI) has a wide potential for a variety of internet of things (IoTs) applications due to their energy-harvesting capabilities and low complexity. However, conventional RSSI-based algorithms present inaccurate ranging, especially in indoor environments, mainly because of the multipath randomness effect. In this work, we propose RSSI-based localization with low-complexity, passive RFID infrastructure utilizing the potential benefits of large-scale MIMO technology operated in the millimeter-wave band, which offers channel hardening, in order to alleviate the effect of small-scale fading. Particularly, by investigating an indoor environment equipped with extremely simple dielectric resonator (DR) tags, we propose an efficient localization algorithm that enables a smart object equipped with large-scale MIMO exploiting the RSSI measurements obtained from the reference DR tags in order to improve the localization accuracy. In this context, we also derive Cramer–Rao lower bound of the proposed technique. Numerical results evidence the effectiveness of the proposed algorithms considering various arbitrary network topologies, and results are compared with an existing algorithm, where the proposed algorithms not only produce higher localization accuracy but also achieve a greater robustness against inaccuracies in channel modeling.

13 February 2019 in Frequenz
Verified
Journal Article
Closed access
PDF file
AAAli Alhaj abbas
Ali Alhaj abbas
MEMohammed El-Absi
Mohammed El-Absi
AAAshraf Abuelhaija
Ashraf Abuelhaija
KSKlaus Solbach
Klaus Solbach
Thomas KaiserThomas Kaiser
Thomas Kaiser
The RCS of flat cylindrical Dielectric Resonators (DR) is investigated and found to be too low for an application of the resonators as tags in a novel indoor localization system at mm-wave frequencies. As a method to increase the RCS of a DR tag, we propose the combination with a constant-index spherical lens. The collimation and scattering properties of this lens type are found suitable for a combination with DRs. The optimum relative permittivity of the lens is found in the range of ϵr=1.6 to 2.8 and the optimum distance between lens surface and DR is found slightly larger than the radius of the DR. RCS enhancement is found to vary with the modes of the DR but increases approximately with the fourth power of the lens radius. However, RCS signatures become corrupted by scattering due to mismatch effects of large lenses such that the lens diameter has to be limited to 4 to 5 wavelengths with the RCS enhancement limited to about 30 to 35 dB. Simulation and experimental verification are performed at a down-scaled frequency range from 4 GHz to 7 GHz using lenses of 60 mm and 120 mm diameter made of paraffin wax.

7 December 2020 in IEEE Access
Verified
Journal Article
Open access
MHMohamed Haj Hassan
Mohamed Haj Hassan
BSBenedikt Sievert
Benedikt Sievert
JSJan Taro Svejda
Jan Taro Svejda
AAAli Alhaj abbas
Ali Alhaj abbas
Alejandro Jiménez SáezAlejandro Jiménez Sáez
Alejandro Jiménez Sáez
DEDaniel Erni
Daniel Erni
In this article, a uniform helically arranged dielectric resonator array can generate Orbital Angular Momentum waves (OAM) causing a conversion of OAM mode orders $m$ from an incoming mode ${m}_{in}$ to an outgoing mode ${m}_{out}$ . The operating frequency is set as 10 GHz to facilitate the measuring process. This new approach provides additional OAM values per digit in the RFID technology according to the excited OAM modes ${m}_{n}\,\,\in \,\,\{\ldots,-2,-1,0,1,2,\ldots \}$ instead of the conventional binary values ${b}_{n}~\in ~\{0, 1\}$ . Thus, more information content is revealed. Through the OAM concept, a ${m}_{1} {m}_{2}~2$ -digits OAM coded tag is obtained upon the employment of two uniform helically arranged cylindrical dielectric resonator arrays operating at two different frequencies ${f}_{1} = 10\,\,\text {GHz}$ , and ${f}_{2} = 11\,\,\text {GHz}$ . Each array has 8 DRs but with different radius yielding a reduction of the mutual coupling between the varied circular arrays. The interaction between the phase delayed radiation of each DR element in the array generates different vortex waves with corresponding OAM mode orders. In order to achieve the correct phase delay, the elevation of each DR is specified by the desirable OAM mode order, the number of elements and the propagation wavelength. At first, the generation of OAM mode orders −1, 2, and −3 is carried out. Then, mode conversion from 0 to −1, +1 to −2, −1 to 0, +2 to −3, and −2 to +1 are depicted. After that, two simulated examples of 2-digits OAM coded tags with the code $\{-1,1\}$ and $\{-2,0\}$ are presented. A conversion of mode 0 to mode 1 has been simulated and also measured, where an additional metal sheet is used to evaluate the distortion in the OAM modes. As a result, this study demonstrates that the uniform helically arranged DR arrays can convert the incoming OAM mode order into another one, where the clutter from broadside direction is rejected due to the Butler matrix (BM), which interferes the clutter destructively.