Yangyi Zhang

Yangyi Zhang

Auto-generated profile, based on publicly available information

Yangyi Zhang

Southern University of Science and Technology

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 July 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
DXDongfan Xu
Dongfan Xu
YZYangyi Zhang
Yangyi Zhang
XLXiongshi Luo
Xiongshi Luo
ZLZhenghao Li
Zhenghao Li
QPQuan Pan
Quan Pan
This brief presents a fully integrated flippedvoltage-follower (FVF) based 0.96-0.9-V low-dropout regulator (LDO) with a high-gain two-stage cross-coupled error amplifier (XCEA). The proposed XCEA overcomes the constraint of intrinsic gain and helps achieve better power supply rejection (PSR) and load regulation. Besides, by setting power supplies of the pass transistor and EA separated and unequal, the efficient dropout increases and different parts of PSR could be measured individually. Fabricated in 28-nm bulk CMOS process, consuming 135-μA quiescent current and occupying active area of 0.0017 mm2, the LDO features 27-MHz unity-gain bandwidth (UGB) at 20-mA load. The proposed LDO achieves 1.6 ns response time with 160-mV measured voltage undershoot for a 0-to-20-mA load transient current in 100 ps with CL = 200 pF. Owing to the proposed high-gain XCEA, the overall PSR is as good as -38 dB at 10 kHz and -20 dB at 30 MHz.

16 April 2024 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
LZLiping Zhong
Liping Zhong
HWHongzhi Wu
Hongzhi Wu
WWWeitao Wu
Weitao Wu
CWCatherine Wang
Catherine Wang
WXWenbo Xiao
Wenbo Xiao
QPQuan Pan
Quan Pan
A $2\times56$ Gb/s 0.78-pJ/b four pulse-amplitude modulation (PAM-4) single-ended multiple-input multiple-output (MIMO) crosstalk cancellation and signal reutilization (XTCR) receiver (RX) is investigated for medium-reach (MR) backplane communications. An XTCR scheme based on active crosstalk extraction (A-XTCR) is proposed to improve the signal reutilization efficiency of the RX. By adopting the proposed asymmetric-inductor current-mode logic (CML) single-ended-to-differential (S2D) converter, the pseudo-differential output mismatch is alleviated. Fabricated in 28-nm CMOS, the RX achieves a bit error rate (BER) of $< 1\text{e}\,\,-10$ at 56-Gb/s PAM-4 transmission with a channel of 24-dB Nyquist loss. Compared with the XTCR based on the conventional passive crosstalk extraction (P-XTCR), the proposed A-XTCR technique has improved vertical and horizontal eye openings of the RX by 24% and 15% at 56-Gb/s PAM-4, respectively. The result corresponds to the best energy efficiency of 0.78 pJ/b/lane, which compares favorably with the state of the art.

28 November 2024 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
LZLiping Zhong
Liping Zhong
HWHongzhi Wu
Hongzhi Wu
YZYangyi Zhang
Yangyi Zhang
XCXuxu Cheng
Xuxu Cheng
WWWeitao Wu
Weitao Wu
QPQuan Pan
Quan Pan
This article presents a 112-Gb/s/pin single-ended four-level pulse-amplitude modulation (PAM-4) crosstalk cancellation (XTC) transceiver (TRX) designed to support data rates of up to 224 Gb/s through a pair of differential channels. The receiver (RX) employs a mismatch-mitigation single-ended-to-differential (S2D) converter for minimizing pseudo-differential mismatch. A four-tap feed-forward equalizer (FFE) using a multi-phase clock (MPC) technique is proposed to compensate for pre-and post-cursor inter-symbol interference (ISI) noise with low power consumption. The transmitter (TX) reconfigurable XTC technique is adopted to cancel mild crosstalk noise flexibly, while the multiple-input–multiple-output (MIMO)-XTC technique in the RX is used to eliminate severe inductive crosstalk noise robustly. Fabricated in 28-nm CMOS, the TRX achieves a bit error rate (BER) of $<$ 10 $^{-10}$ at 112-Gb/s PAM-4 transmission with a channel loss of 31 dB at the Nyquist frequency and an energy efficiency of 2.77 pJ/b.

16 April 2025 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
HWHongzhi Wu
Hongzhi Wu
XCXuxu Cheng
Xuxu Cheng
WWWeitao Wu
Weitao Wu
LZLiping Zhong
Liping Zhong
CWCatherine Wang
Catherine Wang
QPQuan Pan
Quan Pan
This article presents a 128-Gb/s current-mode four-level pulse amplitude modulation (PAM-4) transmitter (TX) with a pre-emphasis asymmetric fractional-spaced feed-forward equalizer (AFS-FFE) and an edge-boosting pulse generator. The proposed pre-emphasis AFS-FFE mitigates unequal switching jitter (SWJ) in PAM-4 eyes, extending the minimum eye width by 67%. Additionally, the reconfigurable UI-spaced feed-forward equalizer (FFE) enhances the precision of the equalizer. The edge-boosting pulse generator accelerates the edge-transition speed of the driver’s output signal, increasing the TX’s bandwidth by 26%. Moreover, in the data path, the latch-minimized serializer eliminates 4:1 MUX input-side latches, thereby reducing the power consumption of the TX data path by 36%. Fabricated in a 28-nm CMOS process, measurement results show that the PAM-4 TX can operate in both PAM-4 and non-return-to-zero (NRZ) modes, achieving a maximum data rate of 128 Gb/s with an energy efficiency of 1.5 pJ/bit.

29 July 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
YZYangyi Zhang
Yangyi Zhang
LZLiping Zhong
Liping Zhong
TFTaiyang Fan
Taiyang Fan
XLXiongshi Luo
Xiongshi Luo
HWHongzhi Wu
Hongzhi Wu
QPQuan Pan
Quan Pan
This paper presents a $2\times 80$ Gb/s single-ended trans-admittance trans-impedance (TAS-TIS) 4-level pulse amplitude modulation (PAM-4) receiver with crosstalk cancellation and signal reutilization technique in 28-nm CMOS. Based on the TAS-TIS architecture, to achieve a precise cancellation of the far-end crosstalk, a common mode gain rejection methodology is proposed in the balanced differentiator, ensuring low gain mismatch and low phase skew. Moreover, the proposed Gm-doubler technique in the TAS-TIS architecture enhances the gain of the adder under limited supply voltage conditions. By employing the series peaking combined with an active inductor in the adder, the bandwidth of adder is improved by a factor of 2.2, and the group delay variation is effectively optimized by 65%. The proposed current-mirror-based continuous-time linear equalizer (CTLE) provides high-frequency and low-frequency compensation with 25% power saving. Overall, the measurement results of the proposed receiver demonstrate $2\times 80$ Gb/s PAM-4 eyes with an efficiency of 0.83 pJ/bit/lane and $2\times 56$ Gb/s non-return-to zero (NRZ) eyes over a pair of PCB traces with 13 dB loss at 20 GHz and 28 dB loss at 28 GHz, respectively.

24 December 2025 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
XLXiongshi Luo
Xiongshi Luo
XYXuewei You
Xuewei You
ZLZhenghao Li
Zhenghao Li
HWHongzhi Wu
Hongzhi Wu
YZYangyi Zhang
Yangyi Zhang
QPQuan Pan
Quan Pan
A dc-coupled analog single-ended (SE) transceiver (TRX) front-end supporting 224 Gb/s/lane is presented. It features SE-to-differential (S2D) and differential-to-SE (D2S) conversion, power-efficient broadband analog equalization, and noise suppression. Both the transmitter and receiver front-ends adopt pseudodifferential structures with dual-loop regulators to achieve a high power supply rejection ratio (PSRR). A power bounce canceller (PBC) is proposed for the S2D to reduce the power bounce noise by 76% and improve the eye width (EW) by 12%. Moreover, cascaded continuous-time linear equalizers (CTLEs) with emitter degradation, distributed-peaking technique, and a feedforward low-pass branch are employed to enable low-/medium-/high-frequency equalization, supporting up to 29 dB loss compensation. Fabricated in 130-nm SiGe BiCMOS, the proposed SE TRX front-end demonstrates a data rate of 224 Gb/s PAM-4 with an energy efficiency of 2.08 pJ/b and an FoM of 0.07 pJ/b/dB. To the best of the author’s knowledge, this work is the first SE TRX front-end operating at 224 Gb/s PAM-4.