25 February 2022 in Renewable Energy
20 July 2021 in Journal of Food Process Engineering
6 March 2015 in Drying Technology
Date fruit is a good source of bioactive compounds and natural sugar. It has the potential to be utilized as a substitute for added sugar. Although several forms of dates—such as fresh dates, date paste, and date syrup—are available in the market and used for different applications, free-flow date powder would be highly beneficial in improving shelf-life, ease of handling, and blendability with various foods prepared domestically and in industry. The objective of this study was to produce date powder in a pilot-scale spray dryer and determine its physicochemical qualities. Date powder was produced at eight processing conditions (2 carrier agents (maltodextrin (MD) and gum arabic (GA) × 2 inlet air temperature (150°C and 170°C) × 2 feedstock flow rates (25 ml/min and 40 ml/min)). To the carrier agent was added at 0.4 kg per 1.0 kg of date fruits (dry weight basis), and the feedstock to the spray dryer was prepared at 20% concentration. Date powder was obtained in all eight treatments. Color (L*a*b* values), moisture content, bulk density, wettability, solubility index, hygroscopicity, microstructure analysis (using scanning electron microscope (SEM)), and total phenolic compounds were determined for the spray-dried date powder. The physicochemical characteristics of date powder varied significantly with respect to the processing conditions. Although physical properties of date powder were significantly affected by the carrier agent, there was no difference in total phenolic compounds between date powders produced with MD and GA. An SEM study revealed that date powder produced with MD had smooth, regular-shaped spherical particles but with severe agglomeration. Date powder with GA had relatively smaller particles of irregular sphere with dented surfaces.
17 July 2014 in Journal of Food Process Engineering
5 April 2021 in Journal of Aquatic Food Product Technology
The study was aimed to investigate the mathematical modeling of drying kinetics and quality of shrimp (Metapenaeus dobsoni) dried under a solar–LPG (liquefied petroleum gas) hybrid dryer. The major components of the dryer were a solar water collector, insulated water storage tank, LPG burner with cylinder, drying chamber, stainless steel trays, axial flow fan, and heat exchanger. Initially, shrimps were treated by dipping in a salt solution (3% w/v, water to shrimp ratio of 1:1) at 80°C for 3 mins. The treated shrimps (76.71%, w.b) were dried to the final moisture content of 15.38% (w.b) within 6 h of drying. Mathematical modeling of the drying kinetics showed that the page model could accurately predict the drying behavior of shrimp. An effective moisture diffusivity value of 1.04 × 10−9 was obtained based on the Fick’s equation. Proximate and biochemical composition of dried shrimps were not significantly affected by drying process. The total plate count of dried shrimp was found to be within the acceptable limit (104 CFU/g). It was observed that dried shrimp had a shrinkage rate of 13.28% and a rehydration ratio of 2.48. In the sensory analysis, the color attribute received a significantly higher sensory score.