17 July 2023 in IET Optoelectronics
An algorithm for recovering transmitted static identifiers (IDs) in rolling shutter based Optical Camera Communication systems is proposed by the authors, considering a system comprised of a camera and a circular light source. The goal is to allow the correct decoding when the ID frame is only partially detected in the image. A baseline algorithm as reference for the frame recovery success rate (FRSR) and a reconstruction algorithm based on the idea of capturing multiple frame fragments and reassembling them is proposed in order to recover the transmitted ID not entirely seen on a single image. It was proven, by simulation, that the maximum distance at which the IDs recovery can be guaranteed is increased by 2.5 fold with the proposed algorithm, for 6‐bit, 8‐bit and 10‐bit codewords. An experimental validation algorithm was also proposed, using image processing techniques to extract the bitstreams and test the ID recovery process. The proposed algorithm improves the FRSR for a given distance, even in the presence of considerable bit errors in the bitstreams extracted from the images.
1 January 2025 in IET Optoelectronics
This work demonstrates experimentally the feasibility of using up to 32‐PAM in rolling shutter based optical camera communication (OCC). Two different cameras have been used for OCC performance comparison, namely, a low‐cost Pi Camera V2.1 and a higher‐cost Alvium 1800 U‐500m. Based on the limitations evidenced by this analysis, a decoding algorithm has been proposed to recover the transmitted signal from the acquired images. The experimental evaluation has been carried out for distances up to 2 m, using 8‐PAM, 16‐PAM and 32‐PAM, analysing the received samples histograms and the symbol error rate (SER) for both cameras. Based on the collected experimental results, it is concluded that 32‐PAM is possible with both cameras, with a maximum SER of 0.16% for the Alvium camera and 5.05% for the Pi Camera. Finally, it is observed that both the signal and noise amplitudes remain constant for the tested distances, resulting in a SER that does not notably depend on the distance between the transmitter and receiver.