Magnetorheological (MR) dampers with bypass arrangements and combined annular-radial fluid flow channels have shown superior performance compared to conventional MR dampers with single annular/radial fluid flow gaps. Achieving a higher controllable dynamic force range with low off-state but high on-state damping force is yet a significant challenge for developing MR dampers for high payload ground vehicle suspensions. This paper presents the conceptual design, fabrication, and experimental characterization of a mid-sized large-capacity MR damper equipped with a compact annular-radial MR fluid bypass valve. Extensive experimental tests were conducted to investigate the dynamic characteristics of the proposed MR damper considering wide ranges of excitation frequency, loading amplitude, and electrical current. The equivalent viscous damping and the dynamic range were calculated as functions of loading conditions considered. The proposed damper initially realized the maximum dynamic range and damping force of 2.3 and 5.54 kN, respectively. With MR valve design modifications, the maximum dynamic range and damping force were substantially increased, reaching 5.06 and 6.61 kN, respectively. The effectiveness of the proposed MR damper was subsequently identified by comparing its dynamic range with other conventional MR dampers in previous studies. The results confirmed the superior performance of the proposed MR damper and its potential application for highly adaptive suspension systems for off-road wheeled and tracked vehicles.
21 January 2023 in Journal of Intelligent Material Systems and Structures
This paper presents an optimal design of a large-capacity Magnetorheological (MR) damper suitable for off-road vehicle applications. The damper includes an MR fluid bypass valve with both annular and radial gaps to generate a large damping force and dynamic range. An analytical model of the proposed damper is formulated based on the Bingham plastic model of MR fluids. To establish a relationship between the applied current and magnetic flux density in the MR fluid active regions, an analytical magnetic circuit is formulated and further compared with a magnetic finite element model. The MR valve geometrical parameters are subsequently optimized to maximize the damper dynamic range under specific volume and magnetic field constraints. The optimized MR valve can theoretically generate off-state and on-state damping forces of 1.1 and 7.41 kN, respectively at 12.5 mm/s damper piston velocity. The proposed damper has been also designed to allow a large piston stroke of 180 mm. The proof-of-concept of the optimally designed MR damper was subsequently fabricated and experimentally characterized to investigate its performance and validate the models. The results show that the proposed MR damper is able to provide large damping forces with a high dynamic range under different excitation conditions.