1 February 2012 in Computational Materials Science
1 October 2012 in Chinese Physics B
1 April 2013 in Applied Surface Science
1 December 2011 in Progress in Natural Science: Materials International
Four modified Al diffusion coatings (Al, Cr–Al, Al–Si and Cr–Al–Si coatings) were prepared on Ni3Al based single crystal superalloy IC20. The oxidation tests were carried out at 1 150 °C for up to 100 h. Cyclic hot corrosion tests were carried out at 950 °C for 50 h. The results indicate that the oxidation and corrosion resistances of IC20 alloy are improved significantly by the coatings, and both oxidation and hot corrosion resistances of the four coatings are rated in the order (from worst to best) of Cr–Al, Al, Cr–Al–Si, Al–Si coatings. It is found that the degradations of Al and Cr–Al coatings are very quick due to the serious inter-diffusion between the coatings and substrates. The inter-diffusion between Si-containing coatings and substrates is reduced since Si effectively retards the outward diffusion of Mo. The weak effects of Cr and benefit effects of Si to the oxidation and hot corrosion resistance were discussed. The hot corrosion degradation mechanism of superalloy IC20 was analyzed
1 October 2012 in Chinese Journal of Aeronautics
Al, Al-Si and Cr-Al-Si coatings are prepared onto IC20 alloy by powder pack cementation to improve the oxidation resistance of the alloy. The isothermal oxidation behaviors of the coatings and the uncoated IC20 alloy at 1 100 °C are comparatively investigated. For the coatings, less weight gains are obtained compared to the uncoated alloy after 100 h thermal exposure. The Al-Si coating exhibits the best oxidation resistance, while the addition of Cr accelerates the scale spallation. Phase transformation from β-NiAl to γ and γ′ occurs in the coating after oxidation for extended periods. The oxidation protection and degradation mechanisms for these coatings are discussed