We present a multicore fiber dedicated for next generation transmission systems. To overcome the issue of multicore fibers' integration with existing transmission systems, the fiber is designed in such a way that the transmission parameters for each core (i.e., chromatic dispersion, attenuation, bending loss, etc.) are in total accordance with the obligatory standards for telecommunication single core fibers (i.e., ITU-T G.652 and G.657). We show the results of numerical investigations and measurements carried out for the fabricated fiber, which confirm low core-to-core crosstalk and compatibility with standard single-core single-mode transmission links making the fiber ready for implementation in the near future.
In this Letter we present, for the first time to our knowledge, the results of fiber Bragg grating (FBG) inscription in a novel microstructured multicore fiber characterized by seven single-mode isolated cores. A clear Bragg reflection peak can be observed in all of the 7 cores after one inscription process with a KrF nanosecond laser in a Talbot interferometer set up. We furthermore perform a numerical analysis of the effective refractive indices of the particular modes and compare it with the FBG inscription results. An experimental analysis of the strain and temperature sensitivities of all of the Bragg peaks is also included.
In this paper, a long-distance distributed pressure sensing system based on a special fiber and using frequency-scanned phase-sensitive optical time-domain reflectometry is proposed. The fiber shows high pressure sensitivity (159 MHz/bar) and low loss (3 dB/km) owing to its simple structure made of two large air holes in the cladding. The pressure response of the two orthogonal polarization axes of the fiber is explored distinctively. Distributed pressure sensing over a long sensing range (720 m) and high spatial resolution (5 cm) is demonstrated, resulting in 14,400 resolved sensing points with uncertainty on pressure of 0.49 bar. Discrimination between the temperature/strain and pressure responses is demonstrated, taking advantage of the different pressure and temperature sensitivities of the two polarization axes. In addition, the temperature response of the fiber is studied and the simulation results show the possibility of scaling the temperature sensitivity by adjusting the size of the core. The sensing distance limit due to crosstalk between the polarization axes is also discussed.
In this Letter, we present the technology of fiber Bragg grating (FBG) inscription in highly birefringent (HB) few-mode microstructured fibers (MSFs) with two different (nanosecond and femtosecond) lasers in a Talbot interferometer setup. The spectral characteristics of FBGs written in the core region of the investigated fiber, with particular modes represented by dual peaks, are presented and discussed. Furthermore, we calculate the fundamental fiber parameters (mode effective refractive index and phase modal birefringence) from the spectral characteristics and show very good agreement with the performed numerical fiber characterization. We expect the results of our experiments to be very useful in future development of FBG sensors based on novel HB MSFs, with enhanced strain sensitivity of higher-order modes.
In this work, a compact all-fiber bend sensor based on a dual-core microstructured optical fiber has been manufactured and characterized. The sensor relies on the unbalanced Michelson interferometric technique realized by attaching a piece of silica fiber to one of the fiber cores acting as the unbalancing element. Three probes with different lengths of the unbalancing element have been experimentally tested for sensitivity tailoring analysis. Additionally, a theoretical model has been developed for comparison and verification of the results. Good linear behavior of the spectral shift with bend has been measured and it has been proven that the sensitivity of the sensor depends on the length of the unbalancing element and the orientation of the cores. Higher sensitivities are achieved for shorter lengths of the unbalancing element and orientation of the core axis parallel to the bend direction. The highest sensitivity reported is 9.97 pm/µm for the case of 34 µm of unbalancing element and orientation of 0 degrees.
We demonstrate the highest, to the best of our knowledge, capacity obtained for an OM4 fiber reaching 1.6 Tb/s for 3.5 km of OM4 fiber. The result is obtained using a highly selective modal multiplexer exciting the LP01 mode and a state-of-the-art coherent transmission setup operating in the C-band. The results indicate that there is no need to replace legacy optical fibers to increase their capacity, which may be an extremely important factor when considering the costs of upgrading existing networks.