19 January 2021 in IEEE Electron Device Letters
An optically pumped AlGaN-based vertical-cavity surface-emitting laser (VCSEL) in the deep ultraviolet (DUV) range (<; 280 nm) is demonstrated. The lasing wavelength is 275.91 nm with a threshold power density of 1.21 MW/cm 2 and a linewidth of 0.78 nm. The lasing is believed to be benefited from high internal quantum efficiency (IQE) of the AlGaN-based multiple quantum wells (MQWs) and improved fabrication processes.
19 January 2024 in IEEE Photonics Journal
Gallium Nitride (GaN)-based vertical-cavity surface-emitting lasers (VCSELs) in green spectral region face the difficulty of the “green gap”. One of the main obstacles is the strong polarization electric field in GaN-based materials, which leads to a strong quantum confinement Stark effect (QCSE) and reduces the efficiency of radiative recombination. In this study, we systemically simulated and compared the optical and electrical performance of GaN-based green VCSELs based on Ga-polar and N-polar InGaN quantum wells (QWs) by using the software of PICS3D. The results show that the light-output power of N-polar VCSEL is greatly improved by 183% compared to Ga-polar VCSEL at an injection current of 20 mA, while the threshold current is reduced by 49%. The improved performance is mainly attributed to: 1) the decreased QCSE; 2) the more efficient carrier injection, and 3) the reduced carrier leakage in N-polar devices. The results of this study suggest that N-polar based GaN is promising for the realization of high-performance green VCSELs, which can provide a guidance for the fabrication of high-power green VCSELs.
1 July 2020 in Journal of Vacuum Science & Technology B
To fabricate AlGaN-based ultraviolet (UV) vertical cavity surface-emitting laser diodes, a pair of distributed Bragg reflectors (DBRs) having a smooth surface is desired to have a high quality factor (Q). In this work, photoassisted chemical etching (PCE) was attempted to smoothen the -c(000-2) AlN surface after removing the sapphire substrate by means of the laser lift-off process. First, the conditions for PCE were optimized using an Xe lamp and KOH solution. The root-mean-square roughness of the -c(000-2) AlN surface was reduced from 30.5 to 5.6 nm, which enables us to fabricate an improved HfO2/SiO2 DBR on the AlN surface. Then, using the optimized PCE technique, improved UV (Al,Ga)N planar microcavities were fabricated and distinct cavity-mode-related emissions were observed using the photoluminescence (PL) technique. By comparing the PL spectra between the samples with and without PCE treatment, the Q value at 303 nm for the case of the improved DBR was determined to increase from 174 to 270. The increase in the Q value is mainly attributed to the reduction of scattering losses in optical cavities. Furthermore, the discussion on the mechanism of improved surface during the PCE treatment is given. Consequently, PCE is demonstrated to be a feasible approach to refine the quality of ultraviolet nitride microcavities.
9 July 2024 in IEEE Photonics Technology Letters
In this work, we fabricated high-performance GaN-based ultraviolet resonant cavity light-emitting diodes (RCLEDs) with dual dielectric distributed Bragg reflectors (DBRs). The devices were configured a copper plate and AlN current confinement aperture, which improved thermal dissipation and increased the maximum output power density up to 84.03 W/cm 2 at injected current density of ~36 kA/cm 2 . The emission wavelength of the devices is 376.7 nm and narrow cavity modes were observed with a linewidth of 0.24 nm, corresponding to a high quality factor (Q) of 1570.
1 July 2023 in AIP Advances
For GaN-based vertical-cavity surface-emitting lasers (VCSELs), a suitable current confinement layer is essential for high-performance devices. The effect of different current confinement layers, including SiO2, AlN, and diamond, on the performance of GaN-based VCSELs was compared through simulation. The devices’ heat dissipation and current confinement characteristics were analyzed based on the electro-opto-thermal model. Considering thermal management, the diamond was a better candidate under high injected current. Benefiting from the excellent heat dissipation, the device with diamond shows a significant improvement in output power and the thermal roll-over current. This work gives a superior option for the current confinement layer and can be helpful for future design and fabrication of high-power GaN-based VCSELs.