Applicability of J × B mechanism of MeV fast electron generation is clearly demonstrated through observation of directed electron beam along laser propagation direction (simultaneous emission also along laser polarization/transverse directions) in the interaction of ∼25 fs laser pulse with thin foil target at an intensity of 1–7 × 1019 W/cm2. Fast electron temperature is found to be lower (higher) than ponderomotive for shorter (longer) preplasma scale lengths. Role of pre-acceleration of electrons in the rising part of the laser pulse is suggested for observed efficient J × B acceleration for p-polarization case. 2D particle in cell simulation also supports the above-mentioned observations.
We experimentally demonstrate the transition of fast electron generation mechanism from J × B heating to stochastic heating by varying preplasma scale length in the interaction of ultrashort (∼25 fs) high intensity (∼3–4 × 1019 W/cm2) laser with thin foil. At sharp plasma density laser interaction (contrast ∼2 × 10−10 at 1 ns, L/λ ≪ 1), fast electrons were observed along the laser propagation direction demonstrating J × B heating. Interestingly, fast electron temperature in this case was less than ponderomotive scaling. The reasons were identified to be the small excursion length of electron compared to laser wavelength in sharp density interaction along with energy loss while escaping through the rear surface. A simplistic model has been proposed to understand the energy loss mechanism from the rear surface. Next, preplasma was introduced gradually by varying the amplified spontaneous emission contrast and additional picosecond prepulse at different delays. It resulted in an increase in the energy and temperature of fast electrons. Most importantly, at larger scale length (L/λ ≫ 1), fast electron temperature beyond the ponderomotive limit was observed. The temperature scales with scale length as T∝L0.59 and shows a saturation effect at longer scale length. The results indicate a gradual change in the fast electron generation mechanism to stochastic heating producing superponderomotive energy. Particle-in-cell simulation also very well reproduces our experimental findings.
25 October 2024 in Plasma Physics and Controlled Fusion
In the present work, we investigate the impact of a thin metallic coating on proton acceleration from transparent dielectric foils. A substantial difference in the experimental results is observed based on the placement of the thin metal coating—either on the front surface (the side facing the laser) or on the rear surface of the foil. In the former case, we observed an enhancement in both the energy and flux of the accelerated protons/ions. However, in the latter case, the thin metal coating was found to have a highly detrimental effect on the acceleration process. Measurements conducted on transmitted laser pulse signals confirm the crucial role of the intensity-dependent target material transparency and the laser pre-pulse playing vital roles in determining the proton/ion acceleration dynamics. Numerical simulations involving radiation hydrodynamics followed by two-dimensional particle-in-cell simulations confirm the experimental observations.