10 September 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Modular multilevel converter (MMC) based wind power converter exhibit large sub-module (SM) capacitor voltage fluctuation due to the low-frequency output characteristics of wind turbines. Harmonic injection (HI) can effectively suppress the SM capacitor voltage fluctuation, but its injection value should be adjusted according to the change in MMC operating conditions. This implies that it is challenging to determine the optimal injection value. To address these challenges, we propose an online harmonic injection (OHI) strategy for the MMC operating in a wide frequency range. The strategy comprises second-order harmonic current injection (SHCI) and third-order harmonic voltage injection (THVI), where the amplitude of the second-order harmonic current is calculated automatically to dynamically change with wind speed changes in offshore wind farms. The fluctuation characteristics of the SM capacitor voltage over a wide frequency range are evaluated. The mathematical model of the proposed OHI strategy is then established as a unified calculation principle. The proposed strategy can suppress SM capacitor voltage fluctuations and reduce the MMC power loss over a wide range of wind speeds. The SM capacitance can also be reduced by 27% using the proposed method. The effectiveness of the proposed OHI strategy is validated by Simulink simulations and hardware experiments.
29 December 2025 in IEEE Transactions on Power Delivery
Modular multilevel converter (MMC) has been widely used in DC power transmission, motor control, etc. Sub-modules (SMs) capacitor voltage fluctuation is the main factor affecting the performance and capacitance design of MMC. Besides, harmonic injection is a popular approach to achieve fluctuation suppression of the SMs capacitor voltage, but it is prone to the increase of common-mode voltage. In this paper, a novel series-capacitor-type modular multilevel converter (SCTMMC) is proposed. SCTMMC introduces a new intermediate module between the midpoint of the Traditional MMC arm and the output. With this module, the AC output-side common-mode voltage is eliminated through harmonic injection, the capacitor voltage balance is ensured by a dedicated control scheme, and the quality of the AC current is improved. The effectiveness of the proposed structure and control method in suppressing the arm energy fluctuation is verified by analyzing the mathematical model of SCTMMC. In addition, the SCTMMC has fewer power electronic devices, and the control of the intermediate module is simpler, which showed better compatibility for the improvement of the existing harmonic voltage injection control method. Finally, the performance of SCTMMC was verified by simulation and experiment results.