1 January 2002 in International Journal of Bifurcation and Chaos
1 February 1999 in Microelectronics Journal
1 September 2000 in IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing
A new configuration realizing first-order canonical current processing all-pass filters based on current differencing buffered amplifier, a recently introduced active element, is proposed. Using this configuration, two types of first-order current-mode all-pass filters are derived. They employ only a single active element and a bare minimum number of passive components. No component-matching constrains are required. Because of the high performance of the current differencing buffered amplifier, they are suitable for wideband applications. The derived filters are cascadable because of their high output impedances and they use fewer active and/or passive components compared to their previously reported counterparts. As an application of the proposed first-order all-pass networks, a new current-mode high-Q bandpass filter, which offers a number of advantages over its counterparts, is also given.
20 July 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
This study presents an automated optimization-oriented strategy for designing high power amplifiers (HPAs) using deep neural networks (DNNs). The proposed strategy consists of two optimization phases that are applied sequentially. In the first phase, the circuit topology is optimized by determining the number of passive components in the input and output matching networks using deep learning classification network. In the second optimization phase, component values are estimated using a deep learning regression network with electromagnetic-based Thompson Sampling Efficient Multiobjective Optimization (TSEMO). The proposed approach is compact, in the sense that the optimum solution is automatically generated by the process, opposite to the conventional approaches where manual post-processing is required to prune the process outcomes. It addresses the problem of heavy reliance of the system performance on the designer's experience and automatically generates valid layouts. In the demanding HPA design problem, uses of DNNs have been shown to provide much more accuracy than conventional shallow neural networks. The effectiveness of the proposed method is verified by implementing two designed HPAs, including GaN HEMTs. The efficiency-oriented optimized amplifier reveals higher than 60% drain efficiency, and the gain-oriented optimized amplifier has 17.6-18 dB linear gain in the frequency band of 1.8-2.2 GHz.
1 April 2007 in AEU - International Journal of Electronics and Communications
1 June 2000 in International Journal of Electronics
A new current-mode universal filter with single input and three outputs employing only three dual output current conveyors and five grounded passive elements is presented. The proposed filter realizes three filter functions simultaneously, all at high impedance outputs. No component matching is required and all the passive and active sensitivities are low. Furthermore, the filter can also realize the notch and all-pass responses. Orthogonal control of the natural angular frequency and the quality factor is achieved.