Solution‐processed bulk‐heterojunction solar cells have gained serious attention during the last few years and are becoming established as one of the future photovoltaic technologies for low‐cost power production. This article reviews the highlights of the last few years, and summarizes today's state‐of‐the‐art performance. An outlook is given on relevant future materials and technologies that have the potential to guide this young photovoltaic technology towards the magic 10% regime. A cost model supplements the technical discussions, with practical aspects any photovoltaic technology needs to fulfil, and answers to the question as to whether low module costs can compensate lower lifetimes and performances.
We fabricated flexible transparent conducting electrodes by printing films of single-walled carbon nanotube (SWNT) networks on plastic and have demonstrated their use as transparent electrodes for efficient, flexible polymer-fullerene bulk-heterojunction solar cells. The printing method produces relatively smooth, homogeneous films with a transmittance of 85% at 550nm and a sheet resistance (Rs) of 200Ω∕◻. Cells were fabricated on the SWNT/plastic anodes identically to a process optimized for ITO/glass. Efficiencies, 2.5% (AM1.5G), are close to ITO/glass and are affected primarily by Rs. Bending test comparisons with ITO/plastic show the SWNT/plastic electrodes to be far more flexible.
In this article some brief theoretical considerations addressing the potential of single and tandem solar cells, the main experimental achievements reported in the literature so far and finally some design rules for efficient material combinations in bulk-heterojunction organic tandem solar cells are presented.
Tin sulfide is being widely investigated as an earth-abundant light harvesting material, but recorded efficiencies for SnS fall far below theoretical limits. We describe the synthesis and characterization of the single-crystal tin sulfides (SnS, SnS2, and Sn2S3) through chemical vapor transport, and combine electronic structure calculations with time-resolved microwave conductivity measurements to shed light on the underlying electrical properties of each material. We show that the coexistence of the Sn(II) and Sn(IV) oxidation states would limit the performance of SnS in photovoltaic devices due to the valence band alignment of the respective phases and the “asymmetry” in the underlying point defect behavior. Furthermore, our results suggest that Sn2S3, in addition to SnS, is a candidate material for low-cost thin-film solar cells.
1 March 2007 in Solar Energy Materials and Solar Cells