1 October 2018 in Combustion and Flame
SLShashank Vummidi Lakshman
Shashank Vummidi Lakshman
25 November 2019 in Journal of Materials Chemistry A
Atomic layer deposition of ZrO2 creates reactive islands that limit coarsening and improve the stability of fuel cell cathode Sr0.5Sm0.5CoO3−δ–Ce0.9Gd0.1O2−δ.
18 August 2021 in ACS Energy Letters
25 January 2023 in Journal of Materials Chemistry A
Surface area measurements are important for characterizing porous solids, but commonly used methods such as Brunauer–Emmett–Teller (BET) gas adsorption and computed nanotomography are lacking for certain applications such as the development of solid oxide fuel cell electrodes, which often have absolute surface areas <1 m2 and contain nanoscale features. Presented is a novel method for the surface area determination of samples with total measurable areas of 1–1000 cm2 with a standard deviation ± 1 cm2, utilizing the atomic layer deposition (ALD) of Al2O3 over microstructurally complex internal porosity. The volume of alumina is then quantified using plasma spectroscopy and converted to an area using the known ALD layer thickness. Under the modest ALD reactor soak times used (8.5 s), the precursor penetration depth is found to be ∼50 μm, exceeding the requirement for uniformly coating SOFC functional layers. A model system, (La0.8Sr0.2)0.98MnO3−δ/Ce0.9Gd0.1O1.95 (LSM/GDC) scaffolds of ∼2.7 m2 g−1, was measured using the technique and compared against the BET method, and comparable results were obtained but with 1000 times less material needed. The technique is demonstrated for measurements in two example areas of active SOFC research: exsolved (Ni, Fe) nanoparticles on an Sr(Ti, Fe, Ni)O3−δ electrode and PrOx catalyst nanoparticles infiltrated onto LSM/GDC scaffolds. The technique may be broadly useful wherever the accurate surface area determination of small absolute quantities of porous ceramic structures on the order of 0.1–50 m2 g−1 is sought.
1 October 2018 in Combustion and Flame
19 May 2023 in ECS Transactions
SrTi1-xFexO3-δ (STF) has shown promise as a fuel electrode, and as a basis for fuel electrodes with catalytically active nanoparticle exsolution. This study aims to determine trends in performance and stability of STF in highly reducing environments as Fe-content is varied from x = 0.5 to 0.8. Here we report that, while polarization resistance of STF fuel electrodes decreases with higher Fe-content, this is accompanied with lower stability in highly reducing conditions. For too-reducing conditions and too-high x, partial decomposition of the original perovskite phase is observed with the formation of metallic Fe and a Ruddlesden-Popper STF phase.