We present a regression model for estimating mean August baseflow per square kilometer of drainage area to help resource managers assess relative amounts of baseflow in Maine streams with Atlantic Salmon habitat. The model was derived from mean August baseflows computed at 31 USGS streamflow gages in Maine. We use an ordinary least squares regression model to estimate mean August baseflow per unit drainage area from two explanatory variables: percentage of the basin underlain by sand and gravel aquifers and mean July precipitation in the basin. This model provides the ability to estimate mean August baseflow in cubic meters per second per square kilometer of basin area on user‐selected, ungaged sites throughout Maine south of 46° 21′55″ N latitude. The model has an adjusted R2of 0.78 and a mean 95% prediction interval of plus or minus 0.002 cubic meters per second per square kilometer. A map of the Narraguagus watershed in eastern coastal Maine shows reaches color coded by relative amounts of baseflow predicted by the model as an example of how this method could be applied throughout Maine. The map can be used to identify reaches with relatively higher amounts of baseflow during summer low flows for habitat conservation and restoration work. These areas have the potential to be high‐quality habitat for Atlantic salmon and other cold‐water fish because baseflows are known to moderate stream temperatures in summer low‐flow periods.
First posted December 22, 2020 Director, New England Water Science CenterU.S. Geological Survey10 Bearfoot RoadNorthborough, MA 01532 Below average and infrequent rainfall from May through September 2020 led to an extreme hydrologic drought across much of New England, with some areas experiencing a flash drought, reflecting its quick onset. The U.S. Geological Survey (USGS) recorded record-low streamflow and groundwater levels throughout the region. In September, the U.S. Department of Agriculture (2020) declared Aroostook County in Maine and Hillsborough and Merrimack Counties in New Hampshire as crop disaster areas. By the beginning of October, 166 community water systems and 5 municipalities in New Hampshire, more than 100 municipalities in Massachusetts, and several community water supplies in Connecticut, Maine, and Rhode Island had mandatory water restrictions in place.
Factors affecting iron fouling in wet areas adjacent to roadways were investigated by collecting field rock cut and aqueous physicochemical data; developing exploratory predictive models; and developing geochemical models. Basic data included the identification of iron fouling from aerial imagery and field visits at 374 New Hampshire rock cut locations, and their associated rock-fill sites. Based on field water quality measurements from wet areas at 36 of the rock-fill sites, the occurrence of iron fouling was associated with higher values of specific conductance, lower concentrations of dissolved oxygen and lower pH compared to areas without iron fouling. A statistical model, using boosted regression trees, was developed to predict the occurrence of iron fouling in wet areas adjacent to roadways where rock-fill from nearby rock cuts was used in roadway construction. The model was used to develop a continuous iron fouling probability map for the state of New Hampshire that can be used to better understand the occurrence of iron fouling. Geochemical models illustrate how iron fouling of waters increases along roadways built with fill from sulfidic rock cuts as a result of acid generation from pyrite dissolution and ferrous iron (Fe2+) oxidation and increases in areas with greater specific conductance from deicing runoff caused by cation exchange. More iron is precipitated as goethite in simulations that include pyrite, and in simulations with deicing salts added, indicating that rock-fill sites with rocks that contain pyrite and water with greater salt content could have enhanced iron fouling.
25 April 2018 in Jawra Journal of the American Water Resources Association