22 December 2023 in Science
The power conversion efficiency (PCE) of inverted perovskite solar cells (PSCs) is still lagging behind that of conventional PSCs, in part because of inefficient carrier transport and poor morphology of hole transport layers (HTLs). We optimized self-assembly of [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) onto nickel oxide (NiO
x
) nanoparticles as an HTL through treatment with hydrogen peroxide, which created a more uniform dispersion of nanoparticles with high conductivity attributed to the formation of Ni 3+ as well as surface hydroxyl groups for bonding. A 25.2% certified PCE for a mask size of 0.074 square centimeters was obtained. This device maintained 85.4% of the initial PCE after 1000 hours of stabilized power output operation under 1 sun light irradiation at about 50°C and 85.1% of the initial PCE after 500 hours of accelerated aging at 85°C. We obtained a PCE of 21.0% for a minimodule with an aperture area of 14.65 square centimeters.
6 November 2025 in Science
The spatial heterogeneity of halogen distribution in perovskite thin films represents a critical factor currently limiting both the power conversion efficiency and stability of solar cells. We identified pronounced through-film inhomogeneity in chlorine distribution in formamidinium lead iodide films, with the generally used additive methylammonium chloride. We demonstrated that incorporating alkali metal oxalates could effectively homogenize the chlorine distribution. These compounds underwent thermal dissociation, releasing alkali metal cations that selectively bound chloride ions, which considerably suppressed surface defects and eliminated interfacial barriers. A certified steady-state power conversion efficiency (PCE) of 27.2% (device area and measured mask area: 0.108 square cm and 0.074 square cm, respectively) in perovskite solar cells was achieved, and devices retained 86.3% of their initial PCE after 1529 hours of continuous maximum power point tracking (MPPT) under 1 Sun condition. Moreover, the unpassivated device maintained 82.8% of its original PCE under MPPT at 85°C aging under 1 Sun illumination after 1000 hours.
25 July 2019 in ACS Applied Materials & Interfaces
27 July 2021 in Solar RRL
GOGeorge Omololu Odunmbaku
+3