Lower-cost thermoelectrics: Thermoelectric materials convert heat to electricity, making them attractive for heat harvesting or cooling applications. However, many high-performance thermoelectrics are made of expensive or toxic materials. He et al. found that a material composed of primarily tin and sulfur could be optimized to have relatively good thermoelectric properties. Introducing about 10% selenium to tin sulfide helped tune these properties by electronic band manipulation. This material is a step toward more earth-abundant, less toxic, and lower-cost thermoelectrics than the telluride-based materials currently in use. Science , this issue p. 1418
8 February 2022 in ACS Applied Materials & Interfaces
Owing to the predominant merit of tunable bandgaps, tin-lead mixed perovskites have shown great potentials in realizing near-infrared optoelectronics and are receiving increasing attention. However, despite the merit, there is still a lack of fundamental understanding of the bandgap variation as a function of Sn/Pb ratio, mainly because the films are easy to segregate in terms of both composition and phase. Here, we report a fully stoichiometric synthesis of monocrystalline FAPb
1−
x Sn x I 3 nanocrystals as well as their atomic-scale imaging. On the basis of the systematic measurements of the monocrystalline materials, strain and Coulomb interaction–induced atomic ordering was revealed to be responsible for the unusual discontinuous bandgap jumping near x = 0.5 from the expected bowing effect. As a result, both FAPb 0.6 Sn 0.4 I 3 and FAPb 0.4 Sn 0.6 I 3 have the lowest bandgaps of around 1.27 electron volts, while that of FAPb 0.5 Sn 0.5 I 3 is 1.33 electron volts. Correspondingly, their based light-emitting diodes can emit infrared lights with the wavelengths reaching 930 nanometers.
In this work, Ag/polydopamine composite on glass substrates (Ag/PDA@slides) were formed by using polydopamine (PDA) as both reducing and stabilizing agent to reduce silver salts to silver nanoparticles (NPs) and adhesive them to slides. The morphology and chemical composition of the composite material was characterized by scanning electron microscopy (SEM) and X-ray diffraction pattern (XRD). The prepared Ag/PDA@slide was a highly active catalyst for the reduction of 4-nitrophenol (4-NP) in the presence of sodium borohydride (NaBH4) aqueous solution at room temperature. The reduction rate of the optimal catalyst was as fast as 10 s and it was stable up to 6 cycles without a significant loss of its catalytic activity. By measuring the UV-Vis absorption bonds of Ag/PDA@slides, it proved that condition of the strongest surface plasmon resonance of Ag/PDA@slides is the optimal condition of catalytic reduction of 4-NP.