23 December 2022 in The Baltic Journal of Road and Bridge Engineering
The rapidly growing popularity of electric scooters in recent years has allowed the road user to choose another alternative mode of transportation. On the one hand, it is an ecological means of transportation in the city, allowing you to quickly reach your destination; on the other hand, it is a vehicle that causes risk to road safety. Although this is a fairly new mode of transport, it is already of great concern for road safety authorities. E-scooter accidents are recorded with all road users – pedestrians, bicyclists, motor vehicles, other e-scooter riders, or even alone. In this article, the analysis made according to the accident data of 2019–2020 showed that the highest number of accidents occurred between e-scooters and vehicles. Most e-scooter accidents with motor vehicles occur in the intersection zone or during a vehicle turning manoeuvre to (or from) side streets and exit lanes. A descriptive statistical analysis showed that the proportions of the distribution of road accidents between accident participants changed significantly during the analysis period – the number of road accidents between e-scooters and bicycles increased, while the number of accidents between e-scooters and pedestrians decreased. The road accidents between e-scooters and other vulnerable road users are usually caused by sudden, unexpected manoeuvring of road users. Identification of accident schemes and locations is an additional tool for traffic organisation specialists and road safety professionals to prevent accidents, injuries, and fatalities.
12 December 2024 in The Baltic Journal of Road and Bridge Engineering
Railway noise can negatively affect both people’s health and the value of their real estate. Various noise mitigation measures can be used on the railways. One of them is a noise barrier. Under certain conditions, low-noise barriers can be used to mitigate noise along the rails. Such barriers are installed closer to the railway track than regular noise barriers, which mitigate the noise generated by the wheel-rail interaction. In some cases, the gauge at which structures at railway tracks can be installed is limited; thus, this research was carried out to determine which parameters of low noise barriers were most effective dependent on the distance of the track. The aim of the research was to determine which parameters the low noise barrier would be effective at a longer distance from the railway track compared to existing practice. A railway track noise simulation (existing situation without a noise barrier and with a 3.5 m height noise barrier located 4.0 m from the railway track) was developed. The insertion loss of noise barriers was carried out using the Computer Aided Noise Abatement (CadnaA) software. Numerical noise level simulation was done at a distance of 7.5 m and 45 m from the axis of the railway tracks and various speeds of rolling stock from 50 to 250 km/h. The noise level and insertion loss were calculated at different heights from the top of the railway track (1.5 m, 3.5 m, and 5.5 m). It was established that the speed of the rolling stock had almost no influence on the insertion loss of the noise barrier. Therefore, all additional barriers were simulated at the same rolling stock speed of 250 km/h.
25 June 2020 in The Baltic Journal of Road and Bridge Engineering
Road Safety Audits have already been tightly incorporated in the road design process throughout the world. It has proven to be an effective way of increasing road safety without requiring many resources. The cost-benefit-ratios of Road Safety Audits in developed countries are rather high. In Lithuania, the procedure on Road Safety Audits is fairly new, and the direct links between different problems and their occurrence frequency throughout the years are yet to be determined. In this paper, several audits on road safety, performed between the years 2011 and 2017 by the Road Research Institute of Vilnius Gediminas Technical University, is analysed. The trends of most relevant problem types identified in those audits throughout the years for different types of roads and streets are presented. Based on those trends, the causes of some common problems are being recognised. Recommendations on possible solutions are suggested.