1 October 2015 in Optics & Laser Technology
13 October 2020 in IEEE Sensors Journal
In recent times, the use of Chemical Warfare (CW) agents against civilian and military by terrorists and rogue countries are recurrent. The examples of such attacks are available in open literature. They are highly dangerous due to their acute toxicity nature. They tend to stimulate and paralyze nerve system of the body and cause other toxic side effects. Once these toxic chemicals are released into the atmosphere, timely detection and identification of the same at standoff distances will help the defensive forces to take proper counter measures. Detection techniques such as ion mobility spectrometry, infrared spectrometry, Raman spectrometry, FTIR, LIDAR etc. have been used widely. Among all these techniques, Raman spectroscopy techniques and LIDAR (LIght Detection and Ranging) is the only active remote detection method that can detect and discriminate the chemical agents at standoff distances. Infrared DIAL (Differential Absorption Lidar) is a versatile technique for remote detection of various chemicals. DIAL technique can provide spatially resolved measurements of these agents with sufficient sensitivity (at few ppm levels) at ranges of several kilometers by exploiting the concept such as scattering and absorption from the atmosphere. The main objective of this review paper is to bring out the details of highly potential chemical warfare agents, their properties and laser based remote detection sensors. LIDAR technique is emphasized in more detail because of their long range detection capability, sensitivity and selectivity. An overview of existing R&D based and commercial systems is also discussed.
1 November 2021 in Optics & Laser Technology
25 July 2019 in Sensors and Actuators B: Chemical
1 December 2011 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
1 February 2023 in Review of Scientific Instruments
We report the design and development of a data acquisition and control system for high-speed acquisition of weak, backscattered differential signals and synchronized sequential operation of all subsystems of a tunable, mid-infrared Differential Absorption Lidar (DIAL) system. The presence of a low-level concentration of chemical species results in weak differential return signals. The differential signal also varies dynamically with respect to background atmospheric conditions. The challenge is to measure this low level of differential signal with high resolution and also control the sequence of operation of subsystems such as lasers and scanners for real time testing and evaluation in open field conditions. The concentration spread of the chemical species varies rapidly with distance. In order to capture this spatial variation, the lidar signal should be sampled and digitized at a high sampling rate. A customized Peripheral Component Interconnect based data acquisition of a 12-bit resolution, 30 Mega samples per second sampling rate, and an industrial personal computer-based control system has been realized. Detection algorithms and the firing sequence of the laser have been developed indigenously and implemented in the LabVIEW platform. The developed graphical user interface has various modes of operation as per user requirement and is capable of executing automatic operations for the developed DIAL system in order to detect and identify the chemicals. The performance has been evaluated by detecting the chemical species thiodiglycol at 800 m using 3190 and 3300 nm (online and offline wavelengths) with a differential cross-section of 2.5 × 10−23 m2. Similarly, methane has been detected and quantified with concentration of 2.2 ppm up to 300 m using 3316 and 3326 nm (online and offline wavelengths, respectively).