25 October 2021 in Applied Optics
Polarization measurements conducted with a polarization camera using the Sony IMX 250 MZR polarization image sensor are assessed with the super-pixel calibration technique and a simple test setup. We define an error that quantifies the quality of the polarization measurements. Multiple factors influencing the measurement quality of the polarization camera are investigated and discussed. We demonstrate that polarization measurements are generally consistent throughout the sensor if not corrupted by large chief ray angles or large angles of incidence. The central were analyzed, and it is shown that sufficiently large -numbers no longer influence measurement quality. We also argue that lens design and focal length have little influence on these central pixels. The findings of this study provide useful guidance for researchers using such a polarization image sensor.
1 November 2021 in Optics and Lasers in Engineering
16 September 2021 in Applied Optics
A two-dimensional birefringence measurement method is described. In this procedure, we send light through a rotatable linear polarizer and subsequently through a transparent and birefringent specimen. A polarization camera measures the state of linear polarization from which the relative position of the refractive index axes and the relative phase difference is determined. The measurement range of the phase difference is up torad, which corresponds to an optical retardation of half the wavelength of the light. The imaging system can measure a large sample area within one measurement cycle. Measurement performance is demonstrated with a quarter-wave plate, and an exemplary test case is shown.