Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, P.R. China
Auto-generated profile, based on publicly available information
Cheng Han
Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, P.R. China
Graphitic carbon nitride nanosheets (g-C3N4 NSs) hybridized nitrogen doped titanium dioxide (N-TiO2) nanofibers (GCN/NT NFs) have been synthesized in situ via a simple electrospinning process combined with a modified heat-etching method. The prepared GCN/NT NFs were characterized by a variety of methods and their photocatalytic activities were evaluated by hydrogen (H2) production from water splitting and degradation of rhodamine B in aqueous solution. It was found that the GCN/NT NFs have a mesoporous structure, composed of g-C3N4 NSs and N-doped TiO2 crystallites. The g-C3N4 NSs synthesized after heat-etching were found to be embedded in, and covered, the hybrid NFs to form stable interfaces. The partial decomposition of g-C3N4 releases its nitrogen content which eventually gets doped into the nearby TiO2 skeleton. The GCN/NT NFs give a high photocatalytic H2 production rate of 8,931.3 μmol·h−1·g−1 in aqueous methanol solution under simulated solar light. Such a highly efficient photocatalytic performance can be ascribed to the combined effects of g-C3N4 NSs and N-doped TiO2 with enhanced light absorption intensity and improved electron transport ability. Also, the large surface area of the mesoporous NFs minimizes light reflection on the surface and provides more surface-active sites. This work highlights the potential of quasi-one dimensional hybrid materials in the field of solar energy conversion.
Silicon carbide (SiC) has been considered a promising metal-free photocatalyst due to its unique photoelectrical properties and thermal/chemical stability. However, its performance suffers from the fast recombination of charge carriers. Herein, we report mesoporous SiC nanofibers with in situ embedded graphitic carbon (SiC NFs-Cx) synthesized via a one-step carbothermal reduction between electrospun carbon nanofibers and Si powders. In the absence of a noble metal co-catalyst, the hydrogen evolution efficiency of SiC NFs-Cx is significantly improved under both simulated solar light (180.2 μmol·g–1·h–1) and visible light irradiation (31.0 μmol·g–1·h–1) in high-pH solution. The efficient simultaneous separation of charge carriers plays a critical role in the high photocatalytic activity. The embedded carbon can swiftly transfer the photogenerated electrons and improve light absorption, whereas the additional hydroxyl anions (OH–) in highpH solution can accelerate the trapping of holes. Our results demonstrate that the production of SiC NFs-Cx, which contains exclusively earth-abundant elements, scaled up, and is environmentally friendly, has great potential for practical applications. This work may provide a new pathway for designing stable, lowcost, high efficiency, and co-catalyst-free photocatalysts.
23 October 2014 in Journal of Materials Chemistry A
Porous silicon carbide (SiC) has attracted considerable attention as an alternative catalyst support, particularly in corrosive and high-temperature environment. Herein, we report a facile strategy to controllably fabricate macroporous, meso-microporous and macro-meso-microporous SiC ultrathin fibers (M-SFs, MM-SFs and MMM-SFs, respectively) mats with good flexibility via electrospinning combined with polymer-derived ceramics route. The formation mechanism of different porous structures has been discussed. The MMM-SFs mat is found to exhibit simultaneously hydrophilic and lipophilic behaviors. Compared with M-SFs and MM-SFs, the MMM-SFs showed higher adsorption capacity, excellent adsorption durability and particularly faster adsorption rate (mass transport) in the adsorption experiments using methylene blue dye as a model. After being treated in dilute sulphuric acid for 5 h and subsequently heated at 800 °C for 1 h, the MMM-SFs retained their long-fiber shape and intact porous structure. Such a MMM-SFs mat may be of interest in high-temperature catalyst support, biosensor and biomedicine, energy storage, gas separation, particularly in harsh environment.
Electrocatalytic conversion of oxygen holds great potential for clean energy technologies, including water electrolysis, regenerative fuel cells, and rechargeable metal-air batteries. The development of highly efficient and inexpensive oxygen electrocatalysts as replacements for precious metal-based catalysts is vitally important for large-scale practical application in the future. A bifunctional oxygen electrocatalyst based on FeCo nanoparticles/N-doped carbon core–shell spheres supported on N-doped graphene sheets was prepared via one-step pyrolysis of graphitic carbon nitride and acetylacetonates. The optimized product exhibited an oxygen electrode activity of 0.87 V and excellent durability. The remarkable performance is mainly attributed to the synergetic effect arising from the FeCo nanoparticles and N-doped carbon shell. This study introduces an inexpensive and simple way to develop highly active bifunctional oxygen electrocatalysts.
30 November 2015 in Journal of Materials Chemistry C
The SnO2NS@SiC NF sensor shows an ultrafast response/recovery rate, high sensitivity, excellent reproducibility, good sensing selectivity and outstanding long-term stability toward ethanol, even at high temperature.
Fast and effective detecting of flammable and explosive gases in harsh environments (high temperature, corrosion atmosphere) is crucial for preventing severe accidents for the chemical industry, fuel cell applications and engine tests. Silicon carbide material is reported to be a good candidate for gas sensing devices applied in extreme conditions. Herein, high-temperature available silicon carbide nanosheets (SiC NSs) were synthesized from graphene oxide (GO) via a catalyst-free carbothermal method. The structure and composition of SiC NSs under different reaction conditions are carefully characterized. The received SiC NSs were firstly utilized as gas sensing materials for hazardous gases (acetone, ethanol, methanol and ammonia) at a high temperature (500 °C). Importantly, the SiC NSs sensors exhibited a fast response (8–39 s) and recovery (12–69 s) towards detecting gases. Besides, an n–p conductivity transition phenomenon is found and studied. This paper firstly proves that such SiC NSs has the potential to be used in gas sensing fields.