10 December 2004 in Physical Review Letters
We demonstrate experimentally that phase-conjugate techniques can be used to achieve super-resolution focusing of electromagnetic waves in a multipath indoor environment at 2.45 GHz. The focusing phenomena was used to direct independent signals to two locations separated by approximately one-half wavelength, thereby creating two simultaneous channels at the same frequency. An increase in channel capacity is shown to be achievable by an experimental transmission of a 1 Mbps signal over two channels created using a four element phase-conjugate array.
24 May 2010 in Proceedings of the IEEE
In this paper, the use of hollow metal heating, ventilating, and air-conditioning (HVAC) ducts as a potential communication channel between passive ultrahigh-frequency (UHF) radio-frequency identification (RFID) readers and tags is studied. HVAC ducts behave as electromagnetic waveguides with much lower signal attenuation compared to free-space propagation. This low-loss electromagnetic environment allows one to greatly increase the communication range of passive UHF RFID systems and build, for example, a long range passive sensor network spanning an entire infrastructure such as a large building. In this work, it is shown both theoretically and experimentally that the read range of passive UHF RFID systems can be increased by multiple times compared to operation in a free-space environment.
1 June 2007 in IEEE/MTT-S International Microwave Symposium
We present an adaptation of a Yagi-Uda antenna design for use inside the overmoded waveguide environment of building ventilation ducts. We obtain experimentally the element size and spacing of a reflector and driven element that can be used for IEEE 802.11 b/g/n signals in a cylindrical duct to provide 3.1 dB of gain and a front-to-back ratio of 9.1 dB compared to a simple monopole antenna. We also discuss the usefulness of such an antenna in a duct network used to distribute wireless signals in a building.