3 March 2023 in Journal of Lightwave Technology
The silicon photonic optical phased array (OPA) featured by high integration and agile beam steering exhibits greatly potential application in optical wireless communication (OWC). In this paper, we demonstrate high-data-rate and long-range OWC using an integrated Silicon-Silicon Nitride OPA chip with 12 mm 2 large aperture. The OPA chip constituted by 128 waveguide grating antennas at nonuniform spacing is employed for wide-steering and small-divergence solid beam steering. In the experiment, we demonstrated 100° wide range communications in horizontal direction via antenna phase tuning. To our best knowledge, 100° is the widest cover range in the reported OPA-based OWC systems. Moreover, the OPA chip is also utilized to achieve up to 32 Gb/s low BER transmission of non-return-to-zero (NRZ) signal over 54 m free space distance. In addition, we also successfully demonstrated more than 50 Gb/s PAM4 signal transmission by measuring clear eye diagrams at the horizontal direction of 0° and 50° over 10 m. Thanks to agile beam steering of the OPA, switching time among arbitrary positions in multi-targets communication can be less than 27 μs. By virtue of tiny beam divergence 0.021° × 0.029° emitted from the OPA, data transmission switching between two targets spaced at 3.5 cm over 20 m can be achieved accurately. The experimental measurement shows the sidelobe crosstalk from the adjacent target channel is less than -25.2 dB. Our demonstrations validate the feasible implementation of the silicon-based OPA in the high-data-rate and wide-steering-range OWC system.
9 February 2023 in Optics and Lasers in Engineering
28 March 2018 in Journal of Lightwave Technology
We experimentally demonstrate a new approach for the generation of widely spaced flexible optical frequency combs in a highly nonlinear fiber (HNLF) using relatively low-speed components. A cavity-less 10-GHz optical pulse source is passively multiplied to 50 GHz via the fractional temporal Talbot effect. The repetition rate multiplied pulse train then propagates in an HNLF together with a continuous-wave probe laser to achieve comb spacing multiplication through cross-phase modulation. Numerical study shows that the timing jitter of the initial 10-GHz optical pulse induces insignificant excess phase noise at high-frequency offset relative to the optical comb lines, which favors a low phase noise wideband frequency comb generation. The spectral linewidth of the central 17 comb lines are characterized, exhibiting well-preserved linewidth quality as the probe laser. Furthermore, the tunability of the generated comb, relevant from a practical perspective, is analyzed by means of conversion efficiency. Finally, the central 11 comb lines are individually modulated by Nyquist-shaped 32 GBaud 16 quadratic-amplitude modulation signals, demonstrating the applicability of the comb source in providing optical carriers for a coherent transmitter.
18 April 2018 in IEEE Photonics Technology Letters
We introduce a novel approach for flexible generation of wide-spaced optical frequency combs. The comb is obtained from cross phase modulation of a continuous-wave laser by a high-speed pulse train generated from a programmable pulse-rate multiplier. The multiplier provides an energy-efficient way for pulse-rate multiplication through electro-optic phase modulation followed by the temporal Talbot effect. In the demonstration, we multiply the rate of a 9.91-GHz optical pulse train by different factors of 3, 4 and 5. Subsequently, the multiplied pulses are applied to generate frequency combs spaced at 29.73, 39.64, and 49.55 GHz, respectively. The linewidths of the spectral lines are characterized. We also numerically investigate the influence of the deviation in modulation patterns on the suppression of the undesirable secondary comb peaks.
29 December 2022 in IEEE Electron Device Letters
In this letter, we report a cascaded surface-illuminated Germanium-on-Silicon (Ge-on-Si) avalanche photodiode (APD) array with a low dark current. The photodetector array cascades seven Ge-on-Si APDs through interconnecting the charge regions to form photomultiplier tubesiPMTjC which increases the effective light absorption area compared to the single APD scheme. To the best of our knowledge, this is the first time that Ge-on-Si PMT has been reported. The optimum response of single-electrode (2 pixels) Ge-on-Si APD is 2.4 A/W with a dark current of 100 nA, and the optimum bandwidth is 52 MHz. PMT has a responsivity of approximately 3 times that of a single-electrode Ge-on-Si APD for the same dark current (100 nA). With low dark current, our PMT has a better optical amplification effect than the parallel Ge-on-Si PD. We have also further tested the current tuning properties of the Ge-on-Si APD arrays with different applied Ge voltages. The test demonstrates the feasibility of cascading three-electrode APD arrays. A cascaded Ge-on-Si APD array with good photodetection properties at low-light conditions has been demonstrated which provides guidance for the design of large-scale Ge-on-Si APD arrays for light detection and ranging application.
19 September 2019 in Journal of Lightwave Technology
The programmable envelope shaping technique of high-repetition-rate optical pulse sequences with low-speed modulation is summarized in this letter. First, we reviewed our work on amplitude-only modulation approach for generating symmetric envelopes, including parabolic, step-like and binary patterns. Next, we reported our recent demonstration of asymmetric-enveloped pulse generation achieved by applying simultaneous amplitude and phase modulations. The asymmetric patterns we demonstrated include a trapezoid envelope and a random optical pattern. Finally, we analyze the influence of practical issues of the implementation on the generated optical pulse trains through numerical simulation. The newly proposed scheme provides flexibility in envelope processing and enriches the diversity of temporal pulse shapes.