1 January 2010 in Materials & Design (1980-2015)
1 March 2009 in Engineering Failure Analysis
1 July 2005 in Journal of Composite Materials
The purpose of this investigation is to evaluate quantitatively and comparatively the effect of embedding optical fibers (OF) on the mechanical behavior of a carbon fiber-epoxy composite in order to verify whether their presence can possibly degrade the mechanical performance of the host material. The existing literature on this subject is not conclusive about the nature and intensity of this effect. Adding more reliable data to our systematic study contributes to this discussion favoring the conclusion about a harmful influence as a consequence of optical fiber embedment. Three kinds of mechanical tests have been performed in this work: impact tests, static flexural tests, and fatigue tests. The results of some experiments point to a possible detrimental influence related to the presence of the OF, being it different in nature and intensity for each of these tests. The mechanical behavior in static loading conditions seems to be not significantly affected as a consequence of the presence of the OF, while that in impact and fatigue tests are strongly affected, even though this influence being physically distinct from each other. Based on these results, some discussion is made about the possible failure mechanisms that can explain the detected differences.
1 December 2013 in Engineering Failure Analysis
16 July 2008 in Engineering Failure Analysis
12 January 2010 in Materials Science Forum
Aerospace components are characterized by having high strength to weight ratios in order to obtain lightweight structures. Recently, different types of sandwich components using composite materials have been developed with the purpose of combining the effect of reinforced face-sheets with low weight core materials, such as honeycombs and foams. However, these materials must combine damage tolerance characteristics with high resistance under both static and dynamic loads. Cork composites can be considered as an alternative material for sandwich components since cork is a natural material with some remarkable properties, such as high damage tolerance to impact loads, good thermal and acoustic insulation capacities and excellent damping characteristics for the suppression of vibrations. The experiments carried out in this investigation were oriented in order to optimize the specific strength of cork based composites for sandwich components. Static bending tests were performed in order to characterize the mechanical strength of different types of cork agglomerates which were obtained considering distinct production variables. The ability to withstand dynamic loads was also evaluated from a set of impact tests using carbon-cork sandwich specimens. The results from experimental tests showed that cork agglomerates performance depends on the cork granulate size, the type of reinforcing elements and the bonding procedure used for the cohesion with the matrix material.