Chestnut shells are an underutilized lignocellulosic resource with high valorisation potential. In this study, a cascading biorefinery approach based on sequential autohydrolysis was developed to convert them into added-value compounds. For this, a first non-isothermal treatment, at temperatures ranging from 120 °C to 200 °C, followed by solid recovery and re-processing at 200 °C (second treatment) was applied. The most promising condition (two-step process at 140 °C, S0 = 1.61 followed by 200 °C, S0 = 3.40) enabled selective biomass fractionation, yielding phenolic- and oligosaccharide-rich liquors with antioxidant and prebiotic potential. Phenolic compounds’ yield increased with temperature, reaching 23.5 ± 1.1 mg/g of biomass, while up to ~50 % of structural carbohydrates were solubilized, predominantly as oligosaccharides. Sequential processing enhanced fraction selectivity, allowing the recovery of ~4.5 g and ~10.3 g of oligosaccharides per 100 g of biomass in the first and second stages, respectively, while limiting the formation of degradation products. The oligosaccharide-rich fractions promoted the growth of probiotic strains, highlighting their potential as functional food ingredients. In parallel, the residual solid fraction exhibited high enzymatic digestibility, with glucan conversion approaching 100 %, enabling its conversion into bioethanol with yields of approximately 69 % under simultaneous saccharification and fermentation conditions. Overall, the proposed approach enabled the recovery of approximately 40 % of the initial biomass as value-added products. These findings demonstrate the feasibility of integrating the production of functional ingredients and biofuels within a single process, supporting the development of sustainable and circular biomass valorisation pathways for agro-industrial residues.