13 February 2017 in IEEE Transactions on Magnetics
Recently, overhang structures are increasingly used for various applications requiring high torque and power densities in a limited space such as traction motors of electric vehicles and servo motors of robot arms. In the design stage, overhang effects should be taken into account to predict the performances and the temperature rise of a motor with overhang. However, little research has been conducted on the thermal characteristics and analysis methods for a surface-mounted permanent-magnet (SPM) motor with overhang. To address this problem, the electromagnetic and thermal characteristics of the SPM motors with and without overhang are invested in this paper. Specifically, 3D finite-element method is used in electromagnetic analysis to accurately calculate electromagnetic losses which are heat sources in thermal analysis. Moreover, the lumped-parameter thermal network (LPTN) which can consider overhang effects rapidly and precisely is proposed as an analytical method. Through the proposed LPTN, the computation time for thermal analysis is reduced considerably in comparison with a computational fluid dynamics method, and the temperature rise of the motors are precisely predicted. The results calculated in electromagnetic and thermal analysis are verified experimentally with 0.3 Nm, 20- pole/24-slot SPM motors adopting natural cooling.
27 February 2019 in IEEE Transactions on Magnetics
Overhang is a useful structure for increasing the torque and power densities of permanent-magnet (PM) machines without expansion of the machine space. A 3-D finite-element method (FEM) is needed to evaluate the performances of PM machines with an overhang structure because the overhang structure results in non-uniform magnetic flux distributions in the axial direction. However, it is computationally expensive, especially in the early design stage. In this paper, we propose a magnetic equivalent circuit (MEC) model considering the overhang effects of interior PM (IPM) machines. With the proposed MEC, the performances of IPM machines with an overhang structure were precisely calculated and the computational time was significantly reduced. The proposed MEC was verified by the 3-D FEM.
14 November 2017 in IEEE Transactions on Magnetics
The characteristics analysis of an electric machine requires the finite-element method. Hence, a large amount of computation occurs in the design process to take into account uncertainties as the manufacturing tolerances. In this paper, an efficient and useful multimodal optimization algorithm using the kriging surrogate model is proposed for the robust optimization of an electric machine. However, the conventional kriging (CK) method has a memory problem in multi-dimensional problem due to the enlarged correlation matrix. Thus, a sub-domain kriging (SDK) strategy and improved Latin hypercube sampling (ILHS) are proposed not only to solve the memory problem of the CK method, but also to increase the convergence speed. In addition, a gradient-free sensitivity index is proposed for robust optimization in order to address the conventional first and second gradient index which causes a numerical error. The outstanding performance of the proposed algorithm is verified by comparing with other optimization methods via several mathematical test functions which includes multi-dimensional problem. Moreover, the proposed algorithm is applied to a cogging torque reduction design case for interior permanent magnet motor.
6 September 2019 in IEEE Access
The torque and power densities of surface-mounted permanent-magnet (SPM) machines can be improved significantly using an overhang structure. However, it is difficult to analyze and design SPM machines with overhang because a 3D finite-element method (FEM) that uses high computation time is required to consider the overhang effects accurately. To reduce the computation time significantly, we propose an analytical method in which a magnetic equivalent circuit (MEC) model and an analytical solution (AS) of the Laplace and Poisson equations are combined. This method can accurately estimate the performances of SPM machines with overhang as well as significantly reduce the computation time compared with that required for the 3D FEM. The accuracy and generality of the proposed method were verified by comparison with the 3D FEM in different cases.