We examined the influence of liquid height on mechanical and chemical effects in 20 kHz sonication with a new Langevin-type transducer. Mechanical effects were evaluated from the degradation of polyethylene oxide in aqueous solution and chemical effects were measured with potassium iodide solution. Standing waves or reactive zones were observed using sonochemical luminescence and aluminum foil erosion. The observed wavelength was reduced by coupled vibration, compared with the wavelength calculated by dividing velocity by irradiation frequency. As liquid height increased, mechanical effects were suppressed. In the case of chemical effects, the stable sonochemical efficiency gained at a height of over 120 mm, and the sonochemical efficiency were also markedly higher than those of a conventional horn-type one.
In this work, we examined the influence of transducer structure on the mechanical and chemical effects of 20 kHz sonication, where the dissipated power measured by calorimetry was kept constant (5 W). The mechanical effects were evaluated from the degradation rate of poly(ethylene oxide) in aqueous solution, and the chemical effects were measured with potassium iodide solution. The mechanical effects for a bath-type apparatus with the transducers fixed at a node with a diameter of 50 mm are nearly equal to those for a horn-type apparatus. The former transducer showed the strongest chemical effects among the transducers investigated here.