1 May 2023 in IEEE Transactions on Instrumentation and Measurement
The characterization of solid particles in slurry flows is critical for the timely optimization of chemical and petroleum production, yet the development of an efficient characterization method remains challenging. In this work, a novel triaxial vibration method was developed to evaluate the features of slurry flow particles. Particle.wall collision behaviors were analyzed by temporal statistical and peak searching methods, and the particle features were distinguished from the random turbulence noise features of slurry flow in both the global and the local time.frequency 2-D planes. The collision frequency features were optimized by the noncoherence and signal-to-noise ratio (SNR) analysis method in different vibration directions along the x-axis (42.5-48.5 kHz, excluding 45-46 kHz), y-axis (46-48.5 kHz), and z-axis (41.6-42.9 kHz). Corresponding verification experiments were performed, and good agreement was found between the test conditions (average sand and glass size of 380 lm, particle mass rate of 0.27-1.80 g/s, flow velocity of 2.2-3.0 m/s) and vibration levels in three directions. The method was further evaluated by autoclassification with high recognition rates of 85% for sand and 95% for glass. The verified linear relations between the solid particle mass rates and vibration level presented low error rates of 15.97% (z-axis), 10.65% (y-axis), and 6.94% (x-axis) for sand and 10.32% (z-axis), 8.57% (y-axis), and 8.19% (x-axis) for glass, and more particle features were obtained. Therefore, this work complements existing studies and is expected to support the development of particle characterization in three-dimensional space.
1 January 2024 in Physics of Fluids
The intelligent recognition and monitoring of sand particles in annular multiphase flow are of paramount importance for the safe production of high-yield gas wells. In this study, an experiment based on a uniaxial vibration method was initially designed to collect collision response signals between sand particles and the pipe wall. Utilizing wavelet packet analysis, the identification and classification of sand-carrying signals in the liquid film and gas core regions were first achieved. The results indicate that the excitation frequency range for sand-carrying signals impacting the pipe wall in the liquid film region was 19.2–38.4 kHz, while in the gas core region, it was 38.4–51.2 kHz. Finally, convolutional neural network (CNN) models, support vector machine (SVM) models, and CNN-SVM models were constructed to characterize and identify sand particles in annular multiphase flow. The results show that the CNN-SVM model improved the accuracy of sand-carrying data recognition by 2.0% compared to CNN and by 5.6% compared to SVM for gas core region data, and by 1.8% compared to CNN and by 8.6% compared to SVM for liquid film region data. Consequently, this research offers a high-accuracy recognition and classification method for sand particles in the gas core and liquid film regions of annular multiphase flow.