Nanostructured SiOx (0 ≤ x ≤ 2) materials are key for boosting energy density in next-generation Li-ion battery anodes, with the magnesiothermic reduction reaction (MgTR) emerging as a scalable pathway for their production from nanoporous SiO2. In MgTR, SiO2 reacts with Mg at moderate temperatures to form Si and MgO, enabling the preservation of nanostructured features. However, the widespread application of MgTR is hindered by the strong influence of reaction parameters on process dynamics, which leads to the uncontrolled formation of multiple byproducts that not only reduce the Si yield but also require the use of hazardous hydrofluoric acid (HF) for their removal, hampering the synthesis of SiO x due to HF's reactivity with SiO2. Hence, a comprehensive understanding of MgTR dynamics and its interplay with reaction parameters constitutes an essential prerequisite toward the effective synthesis of advanced Si and SiO x nanostructures. In this work, a systematic approach combining a set of independent time-resolved in situ synchrotron X-ray diffraction studies was employed to provide for the first time a comprehensive understanding of MgTR dynamics under varied reaction conditions, including varied SiO2 source (amorphous vs crystalline), different SiO2-to-Mg ratios, and different heating ramps. This approach allowed to unveil a complete picture of MgTR and to identify key conditions to prevent byproduct formation. This advancement marks a critical step toward the large-scale zero-carbon footprint synthesis of Si-based anodes for Li-ion batteries, serving as general guidelines for the controlled synthesis of high-purity Si and SiO x advanced materials.
Silica (SiO2) anodes are promising candidates for enhancing the energy density of next‐generation Li‐ion batteries, offering a compelling combination of high storage capacity, stable cycling performance, low cost, and sustainability. This performance stems from SiO2 unique lithiation mechanism, which involves its conversion to electroactive silicon (Si) and electrochemically inactive species. However, widespread adoption of SiO2 anodes is hindered by their slow initial lithiation. To address this, research has focused on developing electrochemical “activation protocols” that involve prolonged low‐potential holding steps to promote SiO2 conversion. Despite these efforts, the complex and multi‐pathway nature of SiO2 lithiation process remains poorly understood, impeding the rational design of effective activation strategies. By introducing a multi‐probe characterization approach, this study reveals that, contrary to the previously proposed reaction mechanism of SiO2 anodes, the lithiation process initiates at low potentials with the direct formation of Li4SiO4 and LixSi. Electrochemical activation potential was found to significantly influence the degree of conversion, with 10 mV identified as the optimal cut‐off potential for maximizing SiO2 utilization. These findings provide key enablers to unlock the full potential of SiO2 anodes for battery technology.
1 December 2020 in Journal of the Electrochemical Society
Probing the structural changes that electrode materials undergo during electrochemical cycling while monitoring their spatial distribution within the volume gives valuable insights on dynamic processes, i.e. side reactions and evolution of phase migration barriers, often associated to capacity and power limitation. In this work, we present an electrochemical cell to perform spatial and time resolved operando synchrotron X-ray diffraction on Lithium (Li) metal polymer batteries operating at 80 °C. A 3.2 mm diameter battery made of a Li metal anode, a LiFePO4 based cathode, and a solid polymer electrolyte acting as separator, is placed inside a glass-based casing and cycled at a beamline. The cylindrical cell geometry with its small size enables to follow the phase transformations occurring at different states of charge and at different cathode heights. It is possible to create spatially resolved phase distribution plots and to differentiate active material structural changes occurring close to the interface with the electrolyte from those at the current collector vicinity. The results provide a direct observation of the Li diffusion in the LiFePO4 and FePO4 phase distribution. In addition, synchrotron X-ray diffraction computed tomography (XRD-CT) measurements were performed to obtain phase distribution maps at different heights of the battery assembly.