10 December 2025 in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
Mathematical modeling of large synchronous motors is usually performed in a transformed coordinate system, which allows for successful reproduction of typical symmetrical operating modes of such electrical machines: starting, synchronization, load surge, etc. At the same time, instead of a picture of real physical processes in the machine windings, such an approach allows observing only changes in the representative vectors of variable physical quantities. The article proposes a mathematical model of a synchronous motor in a phase (real) coordinate system, which makes it possible to analyze asymmetrical modes of the machine, take into account current changes in its parameters under the influence of temperature, saturation of the magnetic circuit steel, emergency effects, etc. In a particular case, when compiling a system of equations for the equilibrium of circuit voltages and rotor motion, typical assumptions were made that ensured the possibility of using a convenient matrix form of their representation and modeling in the Mathcad environment. The resulting matrix of inductive parameters as a function of the rotor rotation angle is presented in a compact form as submatrices of the stator and rotor windings' own and mutual inductances. The rotor windings of the machine are presented in the model by closed circuits with the corresponding parameters along the longitudinal and transverse axes. The expression of the electromagnetic moment is determined by the rate of change of the energy reserve in the system of interconnected circuits. An algorithm and a special program in the Mathcad environment were developed to solve the system of equations. An objective analysis shows that the presented modeling results adequately reflect the physical processes in the modes of starting and synchronization of a large high-voltage synchronous motor.
6 June 2024 in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
Brushless synchronous motors with two orthogonal field windings on the rotor have low mechanical characteristics during direct asynchronous start-up. The main reason for this is the constant value of additional resistances included in the longitudinal and transverse field windings for the start-up period. The replacement of standard resistance elements with induction rheostats (IR), the complex resistances of which significantly depend on the frequency and amplitude of the flowing current, allows us to meet the most stringent operational requirements for the starting properties of such motors. The article presents a scheme of an experimental installation, with the help of which the practical expediency of using IR in the mentioned contactless synchronous motors is confirmed. The obtained oscillograms show that the disk design of the IR with the given geometric dimensions makes it possible to equalize the electrical resistances and starting currents in the windings of the motor rotor, as well as limit and stabilize its acceleration. Безконтактні (безщіткові) синхронні двигуни, виготовлені на базі асинхронних машин з фазним ротором, мають низькі показники при прямому пуску від мережі, якщо в їх роторні обмотки по ортогональних осях d,q включені постійні за величиною активні опори, значення яких не залежать від частоти, форми та амплітуди протікаючого струму. Результати проведених експериментальних досліджень показали позитивний ефект від застосування в роторних обмотках цих машин індукційних реостатів дискової конструкції, які дозволили досить просто вирівняти комплексні опори синхронного двигуна по осях d, q і забезпечити розворот ротора з постійним прискоренням.
24 December 2024 in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
The article discusses the electromagnetic parameters of an asynchronous motor (AD) with a short-circuited cage of general industrial application for the study of transient processes in an electric drive. The main purpose of the study is to determine the transient characteristics of AD by comparing parameters with reference data and calculations in the ANSYS Maxwell RMxprt program. The parameters defined in the program were found to provide more accurate results for transients. The comparative analysis showed that the active resistance of the stator winding coincides with the reference value, while the inductance is 21 % lower and the mutual inductance is 26 % higher. The use of these parameters in the mathematical model of AD made it possible to obtain more accurate results in comparison with traditional reference values, which contributes to a better understanding of transient processes. The obtained results emphasize the importance of using modern tools, such as ANSYS Maxwell RMxprt, in the study of electromagnetic parameters to increase the accuracy of modeling transient processes in AD, which is relevant for optimizing their designs and operational characteristics.
22 May 2023 in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
У роботі досліджено перехідні процеси в асинхронному двигуні (АД) з фазним ротором (ФР) із увімкненими у роторне коло пусковими реостатами (ПР). Метою роботи є одержання перехідних характеристик пуску АД з ПР шляхом моделювання перехідних режимів роботи в реальному масштабі часу. У результаті моделювання отримані перехідні процеси для симетричного й несиметричного режиму роботи. Показано, що використання пускових реостатів приводить до виникнення додаткових коливань струму в статорному колі, що, у свою чергу, впливає на характер пускового електромагнітного моменту. Враховуючи негативні фактори, що виникають при експлуатації контактної апаратури в реальних умовах, у роботі досліджено перехідні процеси пуску АД з ПР при несиметричному вмиканні пускових резисторів у роторному колі. Отримані результати моделювання дозволяють зробити висновки про негативний вплив зазначених режимів на характер перехідних процесів пуску АД, що на практиці може призводити до аварійних ситуацій.
10 December 2025 in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
This paper presents a comprehensive study of the transient performance of a squirrel-cage induction motor (IM) powered by a thyristor voltage controller (TVC) during start-up under various current-limiting strategies. An advanced coupled simulation model was developed and implemented using the integrated environments of Ansys Simplorer–Maxwell2D and MATLAB Simulink. This hybrid approach enables precise co-simulation of the electromagnetic field dynamics inside the motor — accounting for core saturation, stator and rotor slot leakage, skin effect in rotor bars, skewed slots, and end-ring effects — together with the control logic and power electronics of the TVC. The primary objective of the research is to evaluate how different durations of start-up current limitation affect key operational parameters, including stator phase current, electromagnetic torque, and rotor speed evolution during acceleration. The study compares direct-on-line (DOL) start-up with controlled start-up scenarios where the firing angle of the thyristors is gradually reduced according to an exponential law, thereby limiting inrush current over the first two and four fundamental voltage periods, respectively. Simulation results demonstrate that extending the current-limiting interval from two to four periods effectively reduces the peak start-up current from 4.5·Iₙ (in DOL mode) to as low as 2.8·Iₙ, significantly alleviating thermal and mechanical stress on the motor and driven equipment. However, this improvement comes at the cost of a moderate increase in start-up time (approximately 6 % longer for the two-period limitation case) and a temporary reduction in initial electromagnetic torque, which restricts the applicability of such soft-start schemes primarily to variable-torque loads like pumps and fans. The developed co-simulation framework proves to be a powerful and flexible tool for analyzing complex interactions between power converters and electric machines in transient regimes. It provides a high-fidelity platform for optimizing start-up algorithms, enhancing energy efficiency, and improving the reliability of industrial electric drives. The findings underscore the importance of integrated modeling that bridges field-based electromagnetic analysis with circuit- and control-level simulation. Future work will focus on extending the model to closed-loop control configurations, incorporating real-time feedback of current and speed to dynamically adjust the thyristor firing angle and further refine the trade-off between start-up smoothness and acceleration performance.
2 December 2025 in Математичне моделювання
Одним із основних показників якості радіоприймального пристрою є його здатність виділяти корисний сигнал в умовах наявності радіо завад різної потужності та частоти. Для забезпечення цієї функції в схемах радіоприймальних пристроїв в якості вхідних кіл часто використовують пасивні електричні фільтри. Таким чином, проблема проектування електричних фільтрів є однією з найактуальніших задач у галузі радіотехніки. Водночас, через свою складність, вирішення цієї проблеми не має єдиного універсального підходу, а розробка ефективного методу проектування електричних фільтрів є актуальною науково-технічною задачею. Найефективніший підхід до проектування смугових фільтрів у смузі короткохвильових частот полягає у створенні низькочастотного прототипу фільтра з певною частотою зрізу з подальшим його перерахунком у смуговий фільтр, при цьому порядки прототипу фільтра та цільового фільтра збігаються. Сам низькочастотний прототип розраховується за існуючими таблицями нормалізованих фільтрів. Використання інверторів імпедансу при проектуванні схем фільтрів дозволяє досягти бажаної ефективності схеми як за величиною параметрів реактивних елементів, так і за загальною топологією схеми. У роботі розглянуто методику розрахунку смугових фільтрів на елементах з зосередженими параметрами. Показано поетапну процедуру проектування схеми фільтру, в основі якої лежить нормалізований фільтр-прототип. Досягнення практично реалізованих значень параметрів елементів фільтру забезпечується використанням паралельних LC-контурів та схем інверторів імпедансів. Більша ефективність в реалізації забезпечується шляхом перетворення паралельних і послідовних ланок схеми за допомогою законів Кірхгофа. Наведено оптимальні топології електричних фільтрів і проведено їх математичне моделювання. Отримані результати підтверджують ефективність представленої методики проектування смугових фільтрів.