20 July 2023 in Nature Electronics
23 February 2022 in Science Robotics
Soft robotics greatly benefits from nature as a source of inspiration, introducing innate means of safe interaction between robotic appliances and living organisms. In contrast, the materials involved are often nonbiodegradable or stem from nonrenewable resources, contributing to an ever-growing environmental footprint. Furthermore, conventional manufacturing methods, such as mold casting, are not suitable for replicating or imitating the complexity of nature’s creations. Consequently, the inclusion of sustainability concepts alongside the development of new fabrication procedures is required. We report a customized 3D-printing process based on fused deposition modeling, printing a fully biodegradable gelatin-based hydrogel (biogel) ink into dimensionally stable, complex objects. This process enables fast and cost-effective prototyping of resilient, soft robotic applications from gels that stretch to six times their original length, as well as an accessible recycling procedure with zero waste. We present printed pneumatic actuators performing omnidirectional movement at fast response times (less than a second), featuring integrated 3D-printed stretchable waveguides, capable of both proprio- and exteroception. These soft devices are endowed with dynamic real-time control capable of automated search-and-wipe routines to detect and remove obstacles. They can be reprinted several times or disposed of hazard-free at the end of their lifetime, potentially unlocking a sustainable future for soft robotics.
17 April 2024 in Nature Energy
5 December 2022 in Advanced Materials
Incorporating large organic cations to form 2D and mixed 2D/3D structures significantly increases the stability of perovskite solar cells. However, due to their low electron mobility, aligning the organic sheets to ensure unimpeded charge transport is critical to rival the high performances of pure 3D systems. While additives such as methylammonium chloride (MACl) can enable this preferential orientation, so far, no complete description exists explaining how they influence the nucleation process to grow highly aligned crystals. Here, by investigating the initial stages of the crystallization, as well as partially and fully formed perovskites grown using MACl, the origins underlying this favorable alignment are inferred. This mechanism is studied by employing 3‐fluorobenzylammonium in quasi‐2D perovskite solar cells. Upon assisting the crystallization with MACl, films with a degree of preferential orientation of 94%, capable of withstanding moisture levels of 97% relative humidity for 10 h without significant changes in the crystal structure are achieved. Finally, by combining macroscopic, microscopic, and spectroscopic studies, the nucleation process leading to highly oriented perovskite films is elucidated. Understanding this mechanism will aid in the rational design of future additives to achieve more defect tolerant and stable perovskite optoelectronics.
12 February 2026 in Advanced Materials
Perovskite solar cells (PSCs) offer unique advantages for space‐based energy harvesting, combining cost‐effective manufacturing with flexible, high power‐to‐weight devices that can reduce payload mass in deployable structures. Despite this promise, few reports have demonstrated the viability of this technology in realistic, space‐based scenarios, where they are subjected to large temperature variations and hard radiation. Here, we present a comprehensive analysis of PSC performance in low Earth orbit (LEO). The champion rigid cell exhibited relatively stable in‐orbit performance at ∼80% of initial efficiency over a 44‐day measurement interval that concluded nearly 100 days after launch, corresponding to ∼1600 orbital eclipse cycles and temperature ranges from −25 to 35°C. Mission data was systematically compared with laboratory measurements of rigid and ultrathin flexible PSCs across temperatures from −80 to +80°C and upon exposure to high‐energy proton radiation. Flexible devices retained over 92% efficiency after a proton dose equivalent to 50 years in orbit. Despite this radiation tolerance, mitigating pre‐flight environmental degradation remains a challenge for ultrathin substrates. Combined, this study bridges the gap between short suborbital demonstrations and long‐term orbital performance, highlighting the potential of PSCs as a low‐cost, resilient alternative for light harvesting, even in harsh space environments.
16 March 2026 in Nature Sensors