4 May 2017 in Discover Nano
Mesoporous silica materials (MSMs) of the MCM-41 type were rapidly synthesized by microwave heating using silica fume as silica source and evaluated as adsorbents for the removal of Cu2+, Pb2+, and Cd2+ from aqueous solutions. The effects of microwave heating times on the pore structure of the resulting MSMs were investigated as well as the effects of different acids which were employed to adjust the solution pH during the synthesis. The obtained MCM-41 samples were characterized by nitrogen adsorption–desorption analyses, X-ray powder diffraction, and transmission electron microscopy. The results indicated that microwave heating method can significantly reduce the synthesis time of MCM-41 to 40 min. The MCM-41 prepared using citric acid (c-MCM-41(40)) possessed more ordered hexagonal mesostructure, higher pore volume, and pore diameter. We also explored the ability of c-MCM-41(40) for removing heavy metal ions (Cu2+, Pb2+, and Cd2+) from aqueous solution and evaluated the influence of pH on its adsorption capacity. In addition, the adsorption isotherms were fitted by Langmuir and Freundlich models, and the adsorption kinetics were assessed using pseudo-first-order and pseudo-second-order models. The intraparticle diffusion model was studied to understand the adsorption process and mechanism. The results confirmed that the as-synthesized adsorbent could efficiently remove the heavy metal ions from aqueous solution at pH range of 5–7. The adsorption isotherms obeyed the Langmuir model, and the maximum adsorption capacities of the adsorbent for Cu2+, Pb2+, and Cd2+ were 36.3, 58.5, and 32.3 mg/g, respectively. The kinetic data were well fitted to the pseudo-second-order model, and the results of intraparticle diffusion model showed complex chemical reaction might be involved during adsorption process.
15 April 2019 in Journal of Chemical & Engineering Data
1 October 2019 in Journal of Hazardous Materials
10 May 2022 in Chemosphere
1 January 2014 in Journal of Chemistry
Amino-functionalized mesoporous silica MCM-41 materials have been prepared to develop efficient adsorbents of Cr(VI) in wastewater, using silica fume as silica source. Functionalization with amino groups has been carried out by using grafting method. The materials have been characterized by means of X-ray diffraction (XRD), nitrogen (N2) adsorption-desorption, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Adsorption potential of the material for Cr(VI) removal from aqueous solution was investigated by varying experimental conditions such as pH, initial metal concentration, and contact time. The equilibrium data were analyzed using the Langmuir and Freundlich isotherm by linear regression analysis, and the results show that the adsorption equilibrium data obeyed the Langmuir model. In addition, the kinetics analysis revealed that the overall adsorption process was successfully fitted with the pseudo-second-order kinetic model.
25 July 2023 in Applied Surface Science