5 October 2010 in Optics Express
This paper shows that customised broadband absorption of electromagnetic waves having arbitrary polarisation is possible by use of lossy cut–wire (CW) metamaterials. These useful features are confirmed by numerical simulations in which different lengths of CW pairs are combined as one periodic metamaterial unit and placed near to a perfect electric conductor (PEC). So far metamaterial absorbers have exhibited some interesting features, which are not available from conventional absorbers, e.g. straightforward adjustment of electromagnetic properties and size reduction. The paper shows how with proper design a broad range of absorber characteristics may be obtained.
10 December 2015 in Advanced Energy Materials
8 December 2005 in Bioelectromagnetics
24 May 2012 in IEEE Transactions on Antennas and Propagation
Effective equivalent circuits are used for the prediction of resonant and absorbing behavior of cut-wire-based (CW-based) metamaterials. Firstly, an equivalent circuit applicable to electric resonance frequencies of single CW metamaterial arrays is considered. Secondly, the equivalent circuit is extended for prediction of magnetic resonance frequencies of symmetrically paired CW metamaterial arrays and asymmetrically paired CW metamaterial arrays. Finally, since the magnetic resonance of the symmetrically paired CW arrays is analogous to the resonance of the CW metamaterial absorbers, i.e., absorbing behavior of the absorbers, the absorptance peak frequencies of CW metamaterial absorbers are estimated. Close agreement is obtained with numerically obtained values, the difference being typically 4, 6, 4, and 2% for the single CW, symmetrically paired CW, asymmetrically paired CW metamaterials and CW metamaterial absorbers, respectively. The paper concludes with discussions pointing out differences with a previous equivalent circuit and improvements to the proposed equivalent circuits.
21 May 2014 in Physical Review B
Herein, we propose a model to describe picosecond-nanosecond charge separation and nongeminate recombination in organic semiconductors. The model is used to explain time-resolved electroabsorption (EA) measurements performed on diodes made from phenyl-C61-butyric acid methyl ester. We find that the measured shape of the EA transient is due to a combination of microscopic carrier dynamic effects such as carrier trapping, as well as macroscopic effects such as band bending caused by the nonuniform poloron generation profile across the device. We demonstrate that the initial fast phase of the EA transient is due to hot free carriers being able to move freely within the device; over time these hot free carriers cool and become trapped giving rise to the second slower phase of the transient. We further show that the commonly observed dependence of the EA signal on probe wavelength can be explained in terms of the spatial overlap of electrostatic potential within the device and the optical mode of the probe light. Finally, we discuss the implications of these results for pump-probe experiments on thin organic films.