8 April 2013 in Nanoscale
Recently, many approaches were applied for assembling graphene sheets into a three-dimensional structure. However, it is still a great challenge to obtain a three-dimensional macroporous graphene network with high mechanical strength after drying. Herein, an ammonia strengthened three-dimensional graphene aerogel was prepared. Based on graphene chemistry and ice physics, the mechanical strength of graphene aerogel was improved greatly when the graphene hydrogel was treated by ammonia solution at an ambient temperature. The results demonstrated that the three-dimensional structure of graphene aerogels was destroyed thoroughly without ammonia solution treatment; conversely, the three-dimensional structure was maintained and the compressive strength was improved to 152 kPa at the static load after it was treated by ammonia solution at 90 °C for only 1 h. This phenomenon is due to two reasons: (1) the low freezing point of ammonia solution, which effectively retarded its freezing and then kept the porous structure undestroyed; (2) the reaction between ammonia and graphene hydrogel, which brought some covalent bonds among graphene sheets. We believe our efforts may pave the way for the development and application of three-dimensional graphene based materials.
9 April 2014 in Advanced Energy Materials
30 June 2014 in Advanced Energy Materials
29 April 2014 in Scientific Reports
High stable C/S composites are fabricated by a novel high-temperature sulfur infusion into micro-mesoporous carbon method following with solvent cleaning treatment. The C/S composite cathodes show high Coulombic efficiency, long cycling stability and good rate capability in the electrolyte of 1.0[emsp14]M LiPF6 + EC/DEC (1:1 v/v), for instance, the reversible capacity of the treated C/S-50 (50% S) cathode retains around 860[emsp14]mAh/g even after 500 cycles and the Coulombic efficiency is close to 100%, which demonstrates the best electrochemical performance of carbon-sulfur composite cathodes using the carbonate-based electrolyte reported to date. It is believed that the chemical bond of C-S is responsible for the superior electrochemical properties in Li-S battery, that is, the strong interaction between S and carbon matrix significantly improves the conductivity of S, effectively buffers the structural strain/stress caused by the large volume change during lithiation/delithiation, completely eliminates the formation of high-order polysulfide intermediates, and substantially avoids the shuttle reaction and the side reaction between polysulfide anions and carbonate solvent, and thus enables the C/S cathode to use conventional carbonate-based electrolytes and achieve outstanding electrochemical properties in Li-S battery. The results may substantially contribute to the progress of the Li-S battery technology.
22 May 2014 in Scientific Reports
Graphene aerogels (GAs) with high mechanical strength, tunable density and volume have been prepared only via soaking graphene hydrogels (GHs) in ammonia solution. The density and volume of the obtained GAs are controlled by adjusting the concentration of ammonia solution. Although volume of the GAs decreases with increasing the concentration of ammonia solution, its specific surface area maintains at about 350[emsp14]m2 g-1, and the inner structure changes to radial after ammonia solution treatment. Thus, GAs are particularly suitable for the adsorption and energy storage applications owing to their high specific surface area and unique porous structure. The adsorption capacity of GAs for Pb2+ from aqueous solution maintains at about 80[emsp14]mg g-1, which could reach as high as 5000[emsp14]g m-3 per unit volume and they can be separated easily from water after adsorption.
15 January 2015 in ChemCatChem