Tingwei Gong

Tingwei Gong

Auto-generated profile, based on publicly available information

Tingwei Gong

School of Electronics and Information, Hangzhou Dianzi University, Hangzhou, China

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 July 2023 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
XXXuefei Xuan
Xuefei Xuan
Zhiqun ChengZhiqun Cheng
Zhiqun Cheng
Zhiwei ZhangZhiwei Zhang
Zhiwei Zhang
TGTinwei Gong
Tinwei Gong
GLGuohua Liu
Guohua Liu
CLChao Le
Chao Le
An extended version of the continuous-mode Class-GF power amplifier (PA) design theory is first proposed in this letter by analyzing the impact of input voltage waveform alterations caused by input nonlinearity on the drain current waveform. Then, a novel impedance design space is explored under the extended continuous-mode drain voltage waveform. Thereafter, a multioctave, high-efficiency extended continuous Class-GF (ECCGF) PA component was implemented, fabricated, and measured with a 10-W GaN HEMT device over a 150% bandwidth from 0.4 to 2.8 GHz. The test result shows that the 39–42-dBm output power, 63%–73.2% drain efficiency (DE), and 9–12-dB gain are achieved in the target band.

22 May 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
XXXuefei Xuan
Xuefei Xuan
Zhiqun ChengZhiqun Cheng
Zhiqun Cheng
Zhiwei ZhangZhiwei Zhang
Zhiwei Zhang
TGTingwei Gong
Tingwei Gong
GLGuohua Liu
Guohua Liu
CLChao Le
Chao Le
In this paper, a design method for a high-efficiency power amplifier (PA) with a three-octave operation bandwidth is proposed. A unique impedance matching structure with three paths (TPs) and a series of inverse continuous modes (SICMs) are combined to achieve outstanding performance in terms of operating bandwidth as well as efficiency. Especially, a buffer stage of impedance matching is generated by the proposed TPs structure, which further promotes the expansion of target bandwidth. To verify the proposed methodology, an ultra-wideband PA component is implemented with a 10-W GaN HEMT device. The measurement results demonstrate a fractional bandwidth of 155.6 % from 0.5 to 4.0 GHz, with saturated output power of 39.5–42.2 dBm, drain efficiency (DE) of 57 –79 %, and a large signal gain of 9.5–12.2 dB. These results show that the PA realized by the proposed TPs impedance matching design is suitable for small-base station and multiband applications.

1 March 2024 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
XXXuefei Xuan
Xuefei Xuan
Zhiqun ChengZhiqun Cheng
Zhiqun Cheng
BHBrendan Hayes
Brendan Hayes
Zhiwei ZhangZhiwei Zhang
Zhiwei Zhang
CLChao Le
Chao Le
TGTingwei Gong
Tingwei Gong
In this letter, an in-depth analysis of a series of inverse continuous mode (SICM) power amplifiers (PAs) considering nonlinear input and output active device characteristics is presented. Analysis shows that, compared to conventional SICMs, a more flexible source second-harmonic manipulation space is revealed to promote and maintain the performance of PAs under wideband operation. Moreover, a new load design space is explored to combine the source second-harmonic manipulation space to achieve bandwidth expansion of PAs. Subsequently, a PA operating at 0.9 $-$ 3.5 GHz was designed, fabricated, and tested utilizing the CGH40010F model released by Wolfspeed to confirm the proposed design theory. Experimental results show that a drain efficiency of 61% $-$ 72% can be achieved with a saturated output power of 39.5 $-$ 42 dBm in the desired design frequency band.

21 March 2024 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
XXXuefei Xuan
Xuefei Xuan
Zhiqun ChengZhiqun Cheng
Zhiqun Cheng
BHBrendan Hayes
Brendan Hayes
Zhiwei ZhangZhiwei Zhang
Zhiwei Zhang
CLChao Le
Chao Le
TGTingwei Gong
Tingwei Gong
In this paper, a design strategy for a multi-octave high-efficiency power amplifier (PA) is presented by using a novel completely symmetric ring-resonator bandpass filtering network with a dual-ring embedded architecture. The presented strategy can achieve wideband frequency response and is relatively easy to analyze and implement due to the completely symmetrical structure employed. In addition, odd-even mode analysis and extended continuous Class-F mode are also used collaboratively to complete the bandwidth expansion and efficiency improvement of the PA. To verify the validity of the proposed design strategy, a prototype operating from 0.5 to 3.2 GHz ( fractional bandwidth of 146% ) is designed and implemented using a commercially available 10W GaN device. The fabricated PA achieves a measured drain efficiency ( DE ) of 60.8%-73.4% and gain of 9-12.1 dB at a saturated output power of 39-42.1 dBm over the whole operating bandwidth.

31 July 2024 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
XXXuefei Xuan
Xuefei Xuan
Zhiqun ChengZhiqun Cheng
Zhiqun Cheng
Zhiwei ZhangZhiwei Zhang
Zhiwei Zhang
ZZZiming Zhao
Ziming Zhao
CLChao Le
Chao Le
BHBrendan Hayes
Brendan Hayes
In this article, a combination of a power amplifier (PA) and spoof surface plasmon polaritons (SSPPs) matching networks with broadband response is presented to achieve bandwidth expansion of the PA under the microwave frequency. The proposed SSPP architecture as an output-matching network is designed based on a periodic structure with an L-shaped unit cell. Furthermore, a transition structure with gradient corrugation is specially added to the matching network to achieve the conversion from the quasitransverse electric and magnetic (TEM) mode of the microstrip to the SSPP unit cell while achieving low-loss transmission. To validate the predicted performance, the proposed wideband PA based on the SSPP structure is designed and fabricated using a 10 W GaN device. The test results show that the presented PA achieves a measured bandwidth of 151.2% in the range of 0.5–3.6 GHz while exhibiting an outstanding performance of 9–11.8 dB gain, 61.1%–73.3% drain efficiency (DE), and 39–41.8 dBm output power throughout the entire operating frequency band.

13 March 2024 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
TGTingwei Gong
Tingwei Gong
Zhiqun ChengZhiqun Cheng
Zhiqun Cheng
CLChao Le
Chao Le
XXXuefei Xuan
Xuefei Xuan
Zhiwei ZhangZhiwei Zhang
Zhiwei Zhang
MJMinshi Jia
Minshi Jia
For gallium nitride (GaN) high electron mobility transistors (HEMTs) distributed amplifiers (DAs), the relationship between gain and device size is analyzed in this letter when the total gate periphery is a reasonable and constant value. The analysis reveals that gain is a function of device size as the independent variable. With Lagrange analysis, a reasonable design for device size can be obtained to maximize the gain. Subsequently, a novel design method is proposed based on the theoretical derivation, aiming to enhance the gain performance of DAs. To validate the proposed design method, a broadband two-stage high-gain 10-W capacitively coupled DA has been implemented using the WIN 0.25- $\mu $ m GaN HEMTs process. The measured results of this nonuniform distributed amplifier (NDPA) show a small signal gain of 25 dB, an output power of 10–11 W, and an average power added efficiency (PAE) of more than 25% in the operating frequency range of 2–18 GHz. In addition, the designed NDPA monolithic microwave integrated circuit (MMIC) occupies a chip area of 3600 $\times$ 5000 $\mu $ m $^{2}$ .