21 July 2020 in Energy & Environmental Materials
Intercalation redox materials have shown great promise for efficient water desalination due to available faradaic gallery sites. Symmetric capacitive deionization (CDI) cells previously demonstrated using MXenes were often limited in their salt adsorption capacity (SAC) and voltage window of operation. In this study, current collector‐ and binder‐free Ti3C2Tx MXene electrode architectures are designed with porous carbon as the positive electrode to demonstrate hybrid CDI (HCDI) operation. Furthermore, MXene current collectors are fabricated by employing a scalable doctor blade coating technique and subsequently spray coating a layer of a small flake MXene dispersion. Hydrophilic redox‐active galleries of MXenes are capable of intercalating a variety of aqueous cations including Na+, K+, and Mg2+ ions, showing volumetric capacitances up to 250 F cm‐3. As a result, a salt removal capacity of 39 mg g‐1 with decent cycling stability is achieved. This study opens new avenues for developing freestanding, binder‐ and additive‐free MXene electrodes for HCDI applications.
29 April 2022 in Journal of the American Ceramic Society
7 April 2025 in ACS Applied Nano Materials
Bilayered vanadium oxides (BVOs) are promising cathode materials for beyond-Li-ion batteries due to their tunable chemistries and high theoretical capacities. However, the large size of beyond-Li+ ions limits electrochemical cycling and rate capability of BVO electrodes. Recent reports of MXene-derived BVOs with nanoscale flower-like morphology have shown improved electrochemical stability at high rates up to 5C in nonaqueous lithium-ion batteries. Here, we report how morphological stabilization can lead to improved rate capability in potassium-ion batteries (PIBs) through the synthesis and electrochemical characterization of MXene-derived K-preintercalated BVOs (MD-KVOs), which were derived from two V2CT x precursor materials prepared using two different etching protocols. We show that the etching conditions affect the surface chemistry of the MXene, which plays a role in the MXene-to-oxide transformation process. MXene derived from a milder etchant transformed into a nanoflower MD-KVO with two-dimensional (2D) nanosheet petals (KVO-DMAE) while a more aggressive etchant produced a MXene that transformed into a MD-KVO with one-dimensional (1D) nanorod morphology (KVO-CMAE). Electrochemical cycling of the produced MD-KVOs after drying at 200 °C under vacuum (KVO-DMAE-200 and KVO-CMAE-200) in PIBs showed that electrochemical stability of MD-KVO at high rates improved through the morphological stabilization of 2D particles combined with the control of interlayer water and K+ ion content. Structure refinement of KVO-DMAE-200 further corroborates the behavior observed during K+ ion cycling, connecting structural and compositional characteristics to the improved rate capability. This work demonstrates how proper synthetic methodology can cause downstream effects in the control of structure, chemical composition, and morphology of nanostructured layered oxide materials, which is necessary for development of future materials for beyond-Li-ion battery technologies.
1 April 2021 in Scripta Materialia
24 June 2024 in Journal of Colloid and Interface Science
4 September 2023 in Journal of Power Sources