12 March 2020 in IEEE Access
This paper presents a control strategy for quadruped balancing that enables postural control in underactuated contact configurations (e.g., when standing on two point feet). Underactuated balancing has received considerable attention with prototype control models such as the cart pendulum or acrobot. Yet, when attempting to transition these solutions to balance in legged robots, technical challenges related to friction-limited contacts and the underlying manifold structure of the configuration space prevent straightforward application. This paper presents a new balance control framework that combines constrained optimal control strategies with recent variational-based linearization approaches to solve the balancing problem for a common simplified quadruped model. The controller is implemented as a convex quadratic program (QP) that uses an unconstrained optimal control solution to approximate a friction-constrained optimal policy. Unlike state-of-the-art QP-based balance controllers, the method is able to handle balance in underactuated regimes. Via comparison to model-predictive control strategies, the proposed formulation is highly compact, requiring less computation, while still showing the ability to handle extreme friction limitations. Simulation and hardware results with the MIT Mini Cheetah demonstrate the capabilities of the controller to exploit body angular momentum for disturbance recovery on two feet, and to recover from cases where the center of mass exits the support polygon. These results and the generality of the formulation suggest exploration for further application to bipeds and humanoids.
9 September 2024 in IEEE Robotics and Automation Letters
Identifying the physical properties of the surrounding environment is essential for robotic locomotion and navigation to deal with non-geometric hazards, such as slippery and deformable terrains. It would be of great benefit for robots to anticipate these extreme physical properties before contact; however, estimating environmental physical parameters from vision is still an open challenge. Animals can achieve this by using their prior experience and knowledge of what they have seen and how it felt. In this work, we propose a cross-modal selfsupervised learning framework for vision-based environmental physical parameter estimation, which paves the way for future physical-property-aware locomotion and navigation. We bridge the gap between existing policies trained in simulation and identification of physical terrain parameters from vision. We propose to train a physical decoder in simulation to predict friction and stiffness from multi-modal input. The trained network allows the labeling of real-world images with physical parameters in a self-supervised manner to further train a visual network during deployment, which can densely predict the friction and stiffness from image data. We validate our physical decoder in simulation and the real world using a quadruped ANYmal robot, outperforming an existing baseline method. We show that our visual network can predict the physical properties in indoor and outdoor experiments while allowing fast adaptation to new environments
28 July 2025 in IEEE Transactions on Robotics
We revisit the concept of constraint embedding as a means for dealing with kinematic loop constraints during dynamics computations for rigid-body systems. Specifically, we consider the local loop constraints emerging from common actuation sub-mechanisms in modern robotics systems (e.g., geared motors, differential drives, and four-bar mechanisms). As a complementary perspective to prior work on constraint embedding, we present an analysis that generalizes the traditional concepts of joint models and motion/force subspaces between individual rigid bodies to generalized joint models and motion/force subspaces between groups of rigid bodies subject to loop constraints. We then use these generalized concepts to derive the constraint-embedded recursive forward dynamics algorithm using multi-handle articulated bodies. We demonstrate the broad applicability of the generalized joint concepts by showing how they also lead to the constraint-embedding-based recursive algorithm for inverse dynamics. Lastly, we benchmark our open-source implementation in C++ for the forward dynamics algorithm against state-of-the-art, sparsity-exploiting algorithms. Our alternative derivation is intended to make the constraint embedding methodology more accessible to the broader robotics community, while the benchmarking study clarifies the relative strengths and limitations of constraint embedding versus sparsity-exploiting methods. Indeed, our benchmarking validates that constraint embedding outperforms the non-recursive alternative in cases involving local kinematic loops.
29 November 2024 in arXiv
Designs incorporating kinematic loops are becoming increasingly prevalent in the robotics community. Despite the existence of dynamics algorithms to deal with the effects of such loops, many modern simulators rely on dynamics libraries that require robots to be represented as kinematic trees. This requirement is reflected in the de facto standard format for describing robots, the Universal Robot Description Format (URDF), which does not support kinematic loops resulting in closed chains. This paper introduces an enhanced URDF, termed URDF+, which addresses this key shortcoming of URDF while retaining the intuitive design philosophy and low barrier to entry that the robotics community values. The URDF+ keeps the elements used by URDF to describe open chains and incorporates new elements to encode loop joints. We also offer an accompanying parser that processes the system models coming from URDF+ so that they can be used with recursive rigid-body dynamics algorithms for closed-chain systems that group bodies into local, decoupled loops. This parsing process is fully automated, ensuring optimal grouping of constrained bodies without requiring manual specification from the user. We aim to advance the robotics community towards this elegant solution by developing efficient and easy-to-use software tools.