25 February 2017 in Computers & concrete
Numerical simulation of external pre-stressed steel-concrete composite beams pre-stressing;external tendons;composite beams;finite elements; External pre-stressing is often used in strengthening or retrofitting of steel-concrete composite beams. In this way, a proper numerical model should be able to trace the completely nonlinear response of these structures at service and ultimate loads. A three dimensional finite element model based on shell elements for representing the concrete slab and the steel beam are used in this work. Partial interaction at the slab-beam interface can be taken into account by using special beam-column elements as shear connectors. External pre-stressed tendons are modeled by using one-dimensional catenary elements. Contact elements are included in the analysis to represent the slipping at the tendon-deviator locations. Validation of the numerical model is established by simulating seven pre-stressed steel-concrete composite beams with experimental results. The model predictions agree well with the experimental results in terms of collapse loads, path failures and cracking lengths at negative moment regions due to service loads. Finally, the accuracy of some simplified formulas found in the specialized literature to predict cracking lengths at interior supports at service loading and for the evaluation of ultimate bending moments is also examined in this work.
23 August 2018 in Latin American Journal of Solids and Structures
In this work, a finite element-based approach is presented to study the effective width variation in non-pre-stressed steel-concrete beams under the serviceability stage, including time dependent effects such as concrete creep, shrinkage and cracking. For this purpose, the viscoelasticity theory in conjunction with a nonlinear cracking monitoring algorithm is used to trace the nonlinear viscoelastic response of the structure along time. The present numerical model is fully three-dimensional and permits the inclusion of partial interaction at the slab-beam interface. A comprehensive study is carried out on the long-term response of a composite girder bridge previously studied by other researches. Then, previous results are revised and extended herein. Potential shortcomings of some standard codes related to the effective width evaluation are also investigated. It is demonstrated that the slab effective width varies sharply along the beam axis in the short-term, while it approaches to the actual slab width in the long-term. For the studied example, the common assumption of using only the middle layer of the reinforced concrete (RC) slab for the effective width calculation is revised with a through-thickness integration procedure. The influence of some creep and shrinkage models as well as the ultimate tensile concrete strain on the effective width response is also assessed. Finally, a simple formula is proposed to evaluate the short-term slab effective width for the studied example.
1 August 2016 in Latin American Journal of Solids and Structures
Modeling and simulation of mechanical response of structures, relies on the use of computational models. Therefore, verification and validation procedures are the primary means of assessing accuracy, confidence and credibility in modeling. This paper is concerned with the validation of a three dimensional numerical model based on the finite element method suitable for the dynamic analysis of soil-structure interaction problems. The soil mass, structure, structure's foundation and the appropriate boundary conditions can be represented altogether in a single model by using a direct approach. The theory of porous media of Biot is used to represent the soil mass as a two-phase material which is considered to be fully saturated with water; meanwhile other parts of the system are treated as one-phase materials. Plasticity of the soil mass is the main source of non-linearity in the problem and therefore an iterative-incremental algorithm based on the Newton-Raphson procedure is used to solve the nonlinear equilibrium equations. For discretization in time, the Generalized Newmark-β method is used. The soil is represented by a plasticity-based, effective-stress constitutive model suitable for liquefaction. Validation of the present numerical model is done by comparing analytical and centrifuge test results of soil and soil-pile systems with those results obtained with the present numerical model. A soil-pile-structure interaction problem is also presented in order to shown the potentiality of the numerical tool.
14 December 2021 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
1 November 2013 in Latin American Journal of Solids and Structures
1 October 2014 in Journal of the Brazilian Society of Mechanical Sciences and Engineering