5 March 2024 in IEEE Transactions on Transportation Electrification
The state of health (SOH) is a significant index for the safe and reliable performance of lithium-ion batteries (LIBs). Although electrochemical impedance spectroscopy (EIS) is a promising nondestructive technique for SOH estimation, existing investigations rarely apply EIS to establish SOH estimation mathematical models. Considering the SOH estimation model based on EIS is imposed by the nonlinear and coupled constraints including temperature and state of charge (SOC), in this paper, the charge transfer resistance is extracted first as the aging feature through EIS analysis under different conditions of SOH, SOC, and temperature. Then, a multi-state SOH model is developed based on the charge transfer resistance. The model quantitatively elucidates the interdependencies among charge transfer resistance, SOH, SOC, and temperature. A two-stage SOH estimation strategy is subsequently proposed based on the proposed model to address the inferior of accuracy from the traditional probabilistic model for SOH estimation due to inaccurate model parameters. Specifically, in the first stage, the SOH is initialized. In the second stage, SOH is re-estimated based on optimal point parameters selected by the SOH obtained in the first stage. Finally, the proposed estimation strategy for SOH is verified through experiments, where the estimation maximum RMSE is less than 0.04. Compared to the previous methods, the proposed strategy demonstrates more accuracy in SOH estimation.
6 November 2024 in Renewable Energy
30 July 2024 in IEEE Transactions on Transportation Electrification
This paper conducts an 810-hour durability test on a proton exchange membrane fuel cell (PEMFC) stack under dynamic load cycles (DLC) to investigate PEMFC’s degradation mechanisms for improving its durability. The results indicate that the catalyst layer (CL) degradation is dominant, as revealed by the decline in the transfer coefficient. To accurately extract the transfer coefficient, a novel linear model is proposed considering the leakage current. Moreover, in light of the significant anodic activation loss (accounting for 20.6% at 1 A/cm² at 720 h), this model is further refined by introducing an empirical relationship between the cathode and anode transfer coefficients (R²=0.9243). By comparing the data with the traditional models, it is verified that the proposed model demonstrates higher accuracy and is more convenient to use without requiring additional leakage current measurements. Furthermore, this paper reveals that the CL water content is a crucial factor influencing the reversible transfer coefficient.
18 October 2024 in IEEE Transactions on Transportation Electrification
The state of power (SOP) of lithium titanate batteries with Li 4 Ti 5 O 12 (LTO) anodes is a critical index that quantifies their capability to continuously supply or absorb energy over a specified period. For battery-powered locomotives, accurate SOP estimation is essential for developing control strategies for acceleration and regenerative braking. Nevertheless, the complexity of conventional fractional-order models (FOMs), combined with the non-adaptive estimation algorithms, poses challenges to achieving both efficient and accurate SOP estimation. In this work, a simplified fractional order model (SFOM)-based multi-constraint algorithm (MCA) combined with an unscented Kalman filter (UKF) is proposed to fast online estimate SOP. Firstly, the SFOM is developed by analyzing timescales of dynamic processes based on electrochemical impedance spectroscopy (EIS) across varying states of charge (SOC), temperature, and aging conditions. Secondly, the MCA is designed based on the SFOM to calculate the peak current sequence required for SOP estimation, where SOP is quantified as an average of the power sequence over the peak current. Furthermore, the SOC, an essential parameter for online SOP estimation, is obtained using the SFOM-based UKF. Finally, the proposed method is validated through experiments. The results demonstrate that the proposed method not only reduces the average root-mean-square error in SOP estimation by up to 37.1% but also significantly saves calculation costs compared with traditional estimation methods.
16 January 2025 in IEEE Transactions on Transportation Electrification
In pursuing superior operational efficiency of proton exchange membrane fuel cells (PEMFCs), the precise prediction of lifespan becomes a prerequisite. To address the issues of traditional static indicators like voltage and power, this paper propounds the Relative Voltage Loss Rate (RVLR) as an innovative degradation indicator in dynamic operation contexts. An advanced refinement of the Grey Verhulst model is proposed for the prediction of PEMFCs degradation. First, to deal with the volatility of PEMFCs voltage leading to the roughness in PEMFs degradation indicators, a novel exponential hyperbolic sine function transformation is applied to enhance the smoothness of the PEMFCs indicator sequences. Additionally, the approach employs Newton-Cotes and Newton interpolation techniques to reduce the original model’s background value error. Empirical validation is provided through three case studies involving aging tests from the YK-S20, RG-FCTS-15 and G20 test stations. The proposed method demonstrates substantial accuracy and robustness, evidenced by RMSE values of 0.0031, 0.0017 and 0.0012, R² values of 0.9851, 0.9984 and 0.9939, and MAE values of 0.0019, 0.0010 and 0.0007 across the three datasets, respectively. These results indicate the method’s promise for accurate degradation prognostication.