13 August 2021 in Engineering, Construction and Architectural Management
Purpose: Despite the importance of cognitive monitoring, limited studies attempted to continuously monitor cognitive status of workers regarding mental fatigue effects on fall hazard. Thus, the objective of this study is to investigate and understand the effects of working at height on mental fatigue development for fall hazard prevention.Design/methodology/approach: A quantitative framework using two well-known methods, i.e. Wavelet Packet Decomposition and Sample entropy, is developed to analyze the captured brain signals from Electroencephalography (EEG) to quantitatively assess mental fatigue levels, and seven mental fatigue indices were obtained. Between-subjects lab experiment was designed and conducted to assess mental fatigue in Virtual Reality (VR) environment.Findings: Both of the quantitative methods confirmed that height exposure can adversely affect subjects' vigilance levels and indicated higher levels of mental fatigue. Significant differences were found between the two tested groups (i.e. working at height or on the ground) for six out of seven indices. The results suggested that working-at-height group had higher mental fatigue levels.Research limitations/implications: One limitation of this study is the limited number of subjects recruited for the experiment. Overall, this study is a preliminary and exploratory work towards mental fatigue monitoring and assessment in subjects exposed to fall risk.Originality/value: This is the first study to explore and focus on mental fatigue assessment, particularly for construction falling-from-height hazard prevention by continuously monitoring mental fatigue levels of workers. The research provides insight into construction safety enhancement using smart technologies.
5 August 2022 in Engineering, Construction and Architectural Management
Purpose: Smart contracts using blockchain technology (BCT) is a tool that decentralizes authority and makes it easier to upgrade the contract administration process by providing an efficient system. Current literature provides a good overview of contracts in the construction industry; however, the specific details of BCT's smart contracts applications in the three categories have not been addressed adequately: (1) information quality, (2) enhancing project schedule and progress payment time and (3) reducing conflicts among project stakeholders. Thus, this study aims to analyze smart contracts using BCT by creating a computerized contract model, specifically evaluating its impact on the three identified categories.Design/methodology/approach: In this paper BCT-SmContract was developed through an automated program that utilizes blockchain to define the contractual agreements between different parties in a construction project. BCT-SmContract model provides a new technique to overcome the current challenges associated with factors identified in this study, i.e. (1) information quality, (2) enhancing project schedule and progress payment time and (3) reducing conflicts among project stakeholders. Afterward, the model was tested to ensure validity and reliability through a construction project.Findings: The findings indicated that BCT-SmContract was approximately 90% faster to execute the contract and 100% accurate in reflecting the correct information about the project status, resulting in reduced conflicts.Originality/value: This study has contributed in upgrading the traditional contracting method in construction by developing an automated smart contract model to enhance the processes and achieve higher accuracy.
8 March 2021 in Engineering, Construction and Architectural Management
Purpose: Quantity Takeoff (QTO) is an integral part of the decision-making process. Currently, QTO is mostly done using manual or 2D method, and practitioners are considering the use of BIM quantity takeoff as an effective alternative to the traditional 2D software takeoff. However, the existing literature does not have adequate studies to confirm that the use of BIM-based QTO is better than the 2D method. Therefore, this paper aims to expand and improve the existing literature into a more detailed analysis of each element to investigate that BIM is indeed a better option of the two QTO methods.Design/methodology/approach: A total of 19 factors in four broad categories, i.e. timely decision making, accuracy, collaboration, and level of details were identified to draw a significant comparison between the two procedures, i.e. BIM-based quantity takeoff and traditional 2D takeoff. Surveys and case study are used to collect data for analysis to achieve the research goals.Findings: The questionnaire survey showed that using BIM for the QTO process has significant benefits in achieving higher productivity on takeoff, accuracy, clarity and collaboration among the team members. The case study results also showed improvement in BIM-based QTO by achieving higher accuracy and productivity.Originality/value: Understanding the difference between the two QTO processes is a challenging task; therefore, this paper contributes to drawing a comparison line between the two processes by introducing the factors that affect the QTO process.
13 July 2020 in IEEE Access
Water distribution networks (WDNs) is crucial to ensure social operations and economic activities. However, WDNs are highly sensitive and vulnerable to disasters. The aim of this study is to mitigate the catastrophic consequences of cascading failures in WDNs. A flow-based WDN cascading failure model is built. The extended multi-objective particle swarm optimization model is developed to resist cascading failures and improve resilience. This model takes pipe diameter as the decision variable to minimize cost and maximize pressure deficit. Water balance, pressure, and standard pipe diameter are the constraints. The classical optimal scenario (COS) and the cascading failure scenario (CFS) are simulated. The model is applied to a small and medium-sized benchmarked WDN. Results show that the extended PSO can find the optimal solution on the benchmarked WDN. The Pareto fronts are obtained. Compare to the Pareto fronts between COS and CFS, the pressure deficit under CFS is significantly reduced, and the cost is reduced while the same pressure deficit increased. Different tolerance parameters are tested. The small network is not sensitive to the tolerance parameter, but the medium-sized network is sensitive. The model evaluates a variety of conflicting goals, which help designers and water managers resist cascading failures in WDNs.
2 May 2024 in Engineering, Construction and Architectural Management
Purpose: Computer vision and deep learning (DL) methods have been investigated for personal protective equipment (PPE) monitoring and detection for construction workers’ safety. However, it is still challenging to implement automated safety monitoring methods in near real time or in a time-efficient manner in real construction practices. Therefore, this study developed a novel solution to enhance the time efficiency to achieve near-real-time safety glove detection and meanwhile preserve data privacy. Design/methodology/approach: The developed method comprises two primary components: (1) transfer learning methods to detect safety gloves and (2) edge computing to improve time efficiency and data privacy. To compare the developed edge computing-based method with the currently widely used cloud computing-based methods, a comprehensive comparative analysis was conducted from both the implementation and theory perspectives, providing insights into the developed approach’s performance. Findings: Three DL models achieved mean average precision (mAP) scores ranging from 74.92% to 84.31% for safety glove detection. The other two methods by combining object detection and classification achieved mAP as 89.91% for hand detection and 100% for glove classification. From both implementation and theory perspectives, the edge computing-based method detected gloves faster than the cloud computing-based method. The edge computing-based method achieved a detection latency of 36%–68% shorter than the cloud computing-based method in the implementation perspective. The findings highlight edge computing’s potential for near-real-time detection with improved data privacy. Originality/value: This study implemented and evaluated DL-based safety monitoring methods on different computing infrastructures to investigate their time efficiency. This study contributes to existing knowledge by demonstrating how edge computing can be used with DL models (without sacrificing their performance) to improve PPE-glove monitoring in a time-efficient manner as well as maintain data privacy.
4 November 2024 in IEEE Transactions on Mobile Computing
This research contributes to long-term structural health monitoring (SHM) by exploring radio frequency energy-powered sensor nodes (RF-SNs) embedded in concrete. The RF-SN captures radio energy from a mobile radio transmitter for sensing and communication, which offers a cost-effective solution for consistent in-situ perception. To optimize the system performance across various situations, we've explored both active and passive communication methods. For the active RF-SN, we implement a specialized control circuit enabling the node to transmit data through ZigBee protocol at low incident power. For the passive RF-SN, radio energy is not only for power but also as a carrier signal, with data conveyed by modulating the amplitude of the backscattered radio wave. To address the challenge of significant attenuation of the backscattering signal in concrete, we utilize a square chirp-based modulation scheme for passive communication. This scheme allows the receiver to successfully decode the data even under a negative signal-to-noise ratio (SNR) condition. Performance modeling and optimization for both active and passive RF-SNs are provided in this study. The experimental results verify that an active RF-SN embedded in concrete at a depth of 13.5 cm can be effectively powered by a 915 MHz mobile radio transmitter with an effective isotropic radiated power (EIRP) of 32.5 dBm. This setup allows the RF-SN to send over 1 kilobyte of data within 10 seconds, with an additional 1.7 kilobytes every 1.6 seconds of extra charging. For the passive RF-SN buried at the same depth, continuous data transmission at a rate of 224 bps with a 3% bit error rate (BER) is achieved when the EIRP of the transmitter is 23.6 dBm.