Through laboratory testing, this research studied the connection between air-void structures of hardened concrete and fresh concrete and discussed the effects of the air-void structure on the salt-frost durability of the concrete. The results demonstrate that, in comparison with fresh concrete, the air-void spacing factor shows a close correlation with hardened concrete air-content and decreases in the form of a power function as the air-content increases. When the fresh concrete air-content is more than 6% and the hardened concrete air-void spacing factor is less than 0.18 mm, the influence of parameters of air-void structure on the salt-frost resistance of the concrete reduces. The air-void spacing factor more significantly affects the salt-frost resistance of the concrete compared with air content and the correlation reaches 0.93. Therefore, air-content and air-void spacing factor are recommended for dual control.
18 December 2019 in Advances in Materials Science and Engineering
Fatigue cracks are main damages to steel bridge deck pavement with thermosetting epoxy asphalt. By combining a high-toughness resin material with fiber woven fabrics, this study formed an ultrathin overlay of fiber-reinforced high-toughness resin to improve cracking resistance of pavement. Through theoretical measurement and bending test, this research studied change laws of bending and tensile properties of epoxy asphalt concrete after fiber reinforcement and analyzed bending strength and the maximum failure strain of beams at different temperatures. Moreover, the reinforcing effects of different fibers were discussed. It is found that bending strength, maximum failure strain, and stiffness modulus of the beams with epoxy asphalt are improved after fiber reinforcement. With the decrease of temperature, after fiber reinforcement, the mode of bending failure of the epoxy asphalt mixture (EAM) changes from brittle fracture into shear failure, accompanied with significant yield phenomenon. Furthermore, organic carbon fiber is sensitive to influences of temperature, while glass fiber is least sensitive to temperature.
In order to improve the crack repair effect of high-performance segment structure crack repair materials, in this paper, we used the orthogonal test research method of four factors and three levels to analyze changes in the microstructure of crack repair materials under different material compatibility levels, followed by analysis through the performance testing of repair materials. The flow performance, setting time, compressive and flexural strength, and bonding and tensile strength were studied. The results show that (1) excessively thick epoxy polymer film affects the bond strength, an appropriate increase in the polymer–cement ratio can promote the hydration of cement, and an appropriate increase in gel material can enhance the repair function of repair material; (2) the setting time clearly increases with increases in the polymer–cement and water–cement ratios and the decrease range clearly increases with an increase in the water–cement ratio; (3) the adhesive flexural strength of epoxy polymer repair material increased the most in 28 days; and (4) the bonding tensile strength of the repair material increases first and then decreases with increases in epoxy polymer content. An appropriate increase in the polymer–cement ratio can promote cement hydration.