19 August 2020 in Transportation Letters
The Bus Rapid Transit (BRT) system can be a cost-effective alternative to foster public transportation. However, the delay in signalized intersections is critical to the stable progression of BRT operation. Transit Signal Priority (TSP) control has been studied to enhance the BRT operation. Nevertheless, the implementation of TSP may also impact general traffic and induce objection from the public. Upon this challenging aspect, this study focuses on passive TSP control for the BRT system. A microsimulation-based optimization model is developed to coordinate signal offsets along the arterial of BRT operation, seeking to minimize the delay of BRT vehicles without severely affecting the service level for other traffic. We conduct a case study over the Taichung BRT System in Taiwan; it indicates that the passive TSP control can reduce approximately 22% of transit delay while containing moderate impact on other traffic. In addition, the derived control strategies can increase system capacity with satisfactory service reliability.
3 July 2024 in Simulation Modelling Practice and Theory
29 April 2024 in IEEE Open Journal of Intelligent Transportation Systems
A substantial number of vehicles nowadays are equipped with adaptive cruise control (ACC), which adjusts the vehicle speed automatically. However, experiments have found that commercial ACC systems which only detect the direct leader amplify the propagating disturbances in the platoon. This can cause severe traffic congestion when the number of ACC-equipped vehicles increases. Therefore, an ACC system which also considers the second leader further downstream is required. Such a system enables the vehicle to achieve multi-anticipation and hence ensure better platoon stability. Nevertheless, measurements collected from the second leader may be comparatively inaccurate given the limitations of current state-of-the-art sensor technology. This study adopts deep reinforcement learning to develop ACC controllers that besides the input from the first leader exploits the additional information obtained from the second leader, albeit noisy. The simulation experiment demonstrates that even under the influence of noisy measurements, the multi-leader ACC platoon shows smaller disturbance and jerk amplitudes than the one-leader ACC platoon, indicating improved string stability and ride comfort. Practical takeaways are twofold: first, the proposed method can be used to further develop multi-leader ACC systems. Second, even noisy data from the second leader can help stabilize traffic, which makes such systems viable in practice.
20 March 2024 in Journal of Cycling and Micromobility Research
14 January 2026 in Simulation Modelling Practice and Theory
28 August 2025 in Case Studies on Transport Policy