1 August 2012 in Optical Engineering
Aiming at the space target and two dominant background sources including the sun and earth-atmosphere system, their radiation models are established, and the background influence on the space target detection for the space-based infrared imaging system are discussed in the long wave infrared (8 to 14 μm) range. From the numerical calculation and analysis, we find that the earth-atmosphere system is the strongest background interference source and will form a big detection blind zone, followed by the sun, whose irradiance is about 1.6% of that from the earth-atmosphere system. Compared with these two intense radiations, the space target radiation acting on the space-based infrared detector is so weak that it may be submerged once the target appears in the earth-atmosphere or solar backgrounds. Thus, in order to reduce the influence of the background interferences, necessary measures must be taken to control the space-based infrared detector and its host platform in real time, such as adjusting the flight attitude, changing the detection angle, transferring operating orbit, and so on.
1 June 2012 in Optical Engineering
A kind of angular-multiplexing optical image encryption scheme is proposed based on Fresnel-transform holography and random amplitude encoding. By introducing reference plane waves with different incident angles in the output plane, we accomplished multiple-image encryption. To enhance the feasibility of the system and decrease the coding complexity and precision requirement for random-phase mask, random-amplitude masks were positioned in the input plane and inserted into the reference arm, and some digital manipulations were applied in the encryption and decryption procedure. We analyzed the encryption and decryption quality of the proposed encryption method together with the influence of different random number generators. Numerical simulation proved the validity of the proposed scheme.
21 November 2018 in Optical Engineering
To enhance the thermal stability and scale up the output power of frequency conversion, a temperature-insensitive frequency conversion method is proposed, which is achieved by phase-matching outside principal planes and thermally induced phase-mismatch compensation. In the method, there are three cascaded crystals. Two crystals at the ends are phase matched with propagation directions outside principal planes. The other crystal, with an opposite sign of first temperature derivative of phase mismatch, is sandwiched in the middle and used for compensating the thermally induced phase mismatch generated in the first crystal. In a proof-of-principle study, two KTiOPO4 (KTP) crystals cut at (θ = 78.28 deg, φ = 40.99 deg) and a compensation crystal LiB3O5 (LBO) are employed for temperature-insensitive second harmonic generation of 1064 nm. As a result, the temperature bandwidth and maximum conversion efficiency, respectively, reach at 49.3°C and 56.8% with an interaction length of 14 mm. The proposed method is capable of increasing thermal stability for various frequency conversion processes across a broad spectral band.