1 May 2021 in Applied Mathematical Modelling
9 December 2019 in Journal of Materials Research
1 July 2023 in AIP Advances
The fast refueling of compressed hydrogen has an important influence on the efficiency and safety of the filling process. Precision measurements of the thermodynamic characteristics of hydrogen under the filling process are becoming more important as hydrogen energy is developed and used. One of the key elements of hydrogen fuel cell vehicles is the on-board hydrogen storage cylinder (HSC). Due to the compression of the hydrogen during filling, there could be a fast increase in temperature. The tank's maximum temperature and maximum fueling pressure are both restricted to less than 358.15 K and 125% of the tank's design pressure for safety reasons. This study revealed the hydrogen temperature rise during refueling and developed a theoretical model for computing the temperature rise in the HSC during the high-pressure refueling procedure. The HSC filling procedure was examined using a theoretical approach. Also, the relationship between the refueling procedure and the temperature change of hydrogen in the type IV tank was investigated. The temperature evolution mechanism of various HSCs was explained, and predictions were made for the minimum precooling temperature needed for hydrogen under various filling scenarios. The results of the theoretical analysis gave a theoretical foundation to the present method for controlling the hydrogen temperature of the gas source in the hydrogenation station, which then enables us to determine the optimum amount of energy needed for cooling hydrogen in the hydrogen refueling station.
14 May 2015 in The Journal of Membrane Biology
23 June 2022 in Applied Mathematical Modelling
1 July 2022 in Computational Particle Mechanics
A novel continuum–discrete multiscale coupling (CDMC) method is proposed for lipid bio-membrane to deal with its strain localization problems. This approach differs from classical continuum methods, in which the constitutive models are determined on the basis of macroscale phenomenological experiments. In this multiscale model, the moving least squares (MLS) approximation is used for linking the fully discrete coarse-grained particle model and the corresponding higher-order continuous solid model, and bridging the microscale and macroscale deformation fields. From the numerical point of view, this method can freely select the degree of freedom of a system. Based on the proposed CDMC method, a variationally consistent meshless computational scheme is constructed for simulating the strain localization of lipid bio-membrane sheets. The strain localization behaviors of lipid bio-membrane sheets under tension are simulated by the proposed CDMC method. The effectiveness and accuracy of this method are confirmed comparing with full particle simulations.