9 August 2023 in Renewable Energy
1 January 2024 in Physics of Fluids
In this study, the turbulence amplification mechanism within the strong shock-wave/turbulent boundary layer interaction is investigated using direct numerical simulation (DNS) over a 24° compression ramp with Mach 2.9 flow. A new in-house solver based on the compact finite difference scheme is introduced, and its accuracy is validated by comparing the flow statistics with existing DNS and experimental data. Within the DNS findings, two distinct turbulence kinetic energy (TKE) hotspots are identified. In contrast to previous studies, this study sheds light on shocklets, characterized by mid-frequency features, as a key factor contributing to the second TKE amplification, which occurs near the reattachment point. Streamline coordinate analysis reveals that shear effects dominate TKE production over the flow deceleration effect in the shock-wave/turbulent boundary layer interaction. The shear effect induced by the rolling up of the boundary layer initiates the first TKE amplification near the wall region in proximity to the separation point, followed by flow deceleration due to the main shock wave contributing to TKE generation. The initial detachment of the shear layer enhances the shear contribution. While TKE decreases above the separation bubble due to the positive mean velocity gradient, TKE amplifies again due to the flow deceleration caused by the secondary shock wave. In addition, the intermittently spawning shocklets above the bulge structures enhance the shear effect on the TKE production. Moreover, the generated TKE subsequently transfers to the local pressure minimum line, created by the bulges effect, thereby establishing a spatially converged maximum TKE line.
1 December 2024 in Physics of Fluids
Wind turbines submerged in the upstream wind turbine (UWT) wake lead to reduced power production and increased fatigue loads. However, current wind farm layout optimization processes prioritize power production without addressing fatigue load due to the complexities associated with fatigue load assessment within the UWT wake. In this study, the impacts of wake-turbine overlap on the fatigue load for floating offshore wind turbines are investigated. A large-eddy simulation is used to generate the UWT wake, followed by extensive aeroelastic simulations to meticulously examine the wake-turbine overlap effect over the wake domain. The blade fatigue load results reveal significant influences on the degree of wake-turbine overlap. Blade fatigue load correlates with wake deficit and turbulence, exhibiting a bimodal distribution in the lateral direction with peaks at approximately 0.5 turbine diameter (D) offset while diminishing in the streamwise direction. Despite the complete recovery of power production at 1D lateral offset, a significant fatigue load persists. Furthermore, tower fatigue load and platform motions are notably affected by the degree of wake-turbine overlap and the wave. These findings underscore the importance of incorporating fatigue load analysis into the wind farm layout optimization process to extend the turbine lifespan and reduce operation and maintenance costs.
5 June 2026 in Journal of Fluid Mechanics
The physical mechanism of low-frequency unsteadiness in shock-wave/turbulent boundary layer interaction (STBLI) is studied using direct numerical simulations at Mach 2.9 with momentum-thickness Reynolds number ${\textit{Re}}_\theta \approx 2400$ over three ramp configurations with varying corner curvature. The configurations include a sharp $24^\circ$ compression ramp (R24) and two curved ramps with radii of 7 (C7) and 14 (C14) times the boundary layer thickness. By varying the ramp curvature, the extent of separation is controlled while maintaining sufficient streamline concavity to ensure that the Görtler number remains above its critical threshold. Cases R24 and C7 exhibit a mean separation with a detached shear layer accompanied by pronounced low-frequency unsteadiness, whereas C14 shows only incipient separation with markedly attenuated low-frequency unsteadiness. Sparsity-promoting dynamic mode decomposition reveals the emergence and downstream growth of counter-rotating structures in both low- and mid-frequency bands in all cases. In R24 and C7, these structures undergo growth and merging within the detached shear layer, giving rise to large-scale low-frequency motion, while in C14, their growth remains gradual and largely frequency-independent. The interactions between the counter-rotating structures and detached shear layer redistribute energy toward lower wavenumbers with a reduction at mid-wavenumbers. During this phase, the streamwise enstrophy dominates the enstrophy magnitude. Enstrophy transport analysis shows that the wall-normal-to-streamwise enstrophy tilting dominates the initial generation of streamwise enstrophy, whereas stretching is the primary source of the subsequent downstream growth and alignment. The results suggest that the interaction between the detached shear layer and counter-rotating structures develops into large-scale structures that govern the low-frequency unsteadiness in STBLI.