1 October 2017 in Journal of Nuclear Materials
1 November 2015 in Fusion Engineering and Design
1 January 2014 in AIMS Energy
Concentrated solar power (CSP) systems can play a major role as a renewable energy source with the inherent possibility of including a thermal energy storage subsystem for improving the plant dispatchability. Next-generation CSP systems have to provide an increased overall efficiency at reduced specific costs and they will require higher operating temperatures and larger heat flux densities. In that context, liquid metals are proposed as advanced high temperature heat transfer fluids, particularly for central receiver systems. Their main advantages are chemical stability at temperatures up to 900 ℃ and even beyond, as well as largely improved heat transfer when compared to conventional fluids like oil or salt mixtures, primarily due to their superior thermal conductivity. However, major issues here are the corrosion protection of structural materials and the development of technology components and control systems, as well as the development of indirect storage solutions, to circumvent the relatively small heat capacity of liquid metals. On the other hand, using liquid metals might enable alternative technologies like direct thermal-electric conversion or use of solar high-temperature heat in chemical processes. This article aims at describing research areas and research needs to be addressed for fully evaluating and subsequently utilizing the potential of liquid metals in CSP systems. A second aim of the article is a brief overview of the liquid metal research capabilities of Karlsruhe Institute of Technology (KIT), their background and their relation to CSP and the aforementioned research pathways.
1 October 2014 in Fusion Engineering and Design
1 December 2016 in Nuclear Materials and Energy
Low activation ferritic-martensitic steels (RAFM-steels) are foreseen as structural materials in different blanket designs (HCLL, DCLL, WCLL) with Pb-15.7Li as breeding and partly also as cooling medium. In HCLL and WCLL designs the structural material will be in direct contact with the flowing liquid breeder at operating temperatures up to 550°C. In the past, investigations concerning the corrosion behavior of RAFM-steels like F82H-mod. and Eurofer showed that these alloys are attacked by the flowing breeder. These corrosion tests pointed out, that the corrosion attack depends mainly on flow velocity and temperature. All these alloys were ‘single’ phase ferritic-martensitic steels without any additions. However, structural materials with better strength and creep resistance like ODS-Eurofer or ferritic steels are gathering interest in blanket development and will be required at least for DCLL application due to higher operation temperatures. Nevertheless, reliable data concerning compatibility with Pb-15.7Li are missing until now.In this paper results from long-term corrosion testing of ODS-Eurofer will be reported for exposure times up to 1.5 years at a flow velocity of 0.1m/s. The evaluated data for ODS-Eurofer corrosion will be compared with values of ‘single’ phase ’classical‘ Eurofer. The observed corrosion attack and mechanisms will be discussed in detail considering the testing conditions and the microstructure of the RAFM-steels
1 October 1998 in Journal of Nuclear Materials